Looking for remote switch for G2/M3

[Pydpiper]

Are there any dealers on here who get into the tactical end of our lights?
I am looking for a remote switch for my G2 (they can handle recoil right?) or for my M3T. Also mounts if possible.
Any help would be great!
Thanks
David

 

[lightemup]

http://www.surefire.com/maxexp/main/co_disp/displ/prrfnbr/24372/sesent/00/Tailcap-Switch-Assembly Tapeswitch + clickie and momentary on tailcap itself. Redundancy is a good thing

The XM07 will do the trick on your m3t, not sure about your g2. As far as mounts: Surefire will offer these, as well as other guys such as Daniels Defense, GG & G, maybe Larue etc. Not sure how the M3T would be accommodated though.

One thing to note about your g2: it may not matter for most of the mounts, but in my experience the g2 is slightly wider than the 6p, and it may not fit in all mounts. Probably in the minority, but good to keep in mind...

Also, it depends on what setup you are after. If you have a vertical foregrip, the standard g2 tailcap will do the job perfectly. Perhaps you could try one of the clickie tailcaps if you like the click on, click off idea...

Hope that helps a little

 

[Pydpiper]

Helps alot, thanks!

 

[leukos]

G&P makes an inexpensive tape switch: http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=2745

 

[boosterboy]

Pelican's tape switch for their M6 works with the C-tail caps.

it's 23$

check here

http://www.ar15.com/forums/topic.html?b=2&f=142&t=153666



If you're using a G2 as a weaponslight, get the SF Z32 shock isolated bezel so the recoil of your weapon doesn't knock out the filament.