Sold/Expired Mags FS: 1D and 2C - only 2 left!

[plasmaman]

Keep makin' 'em - time to give some a new home!
All lights except the HID are new hosts, new parts. No batteries included with any lights.
Will post outside UK.
First unconditional "I'll take it'" posted here is first in line, subject to funds.
Prices include postage to UK and to Con US. Other countries please add $15.
Paypal cash or CC to john (at) foxcourt (d0t) co (dot (uk)
So here we go....
1. Mag 1D Silver
Seoul P4 USWOH, Litemania green anodized heatsink, USL lens, grooved head. $135 SOLD

2. Mag 1D Purple
Seoul P4 USWOH, Litemania green anodized heatsink, UCL lens, grooved body. $140.

3. Mag 2C Purple
Mag 2C, customised for 2 x Li C using modified tailcap and brass spacer ring. Kiu socket, MOP (I think) reflector, Boro lens. Currently using WA1111 (not included) and very good it is too! $140.

4. Mag 2D HID
WA 10w HID, tailswitch, 8AA Willie Hunt holder, Boro lens. As new, very little use. See here for full details of this great light http://www.candlepowerforums.com/vb/showthread.php?t=83893
$260 SOLD

5. Mag 2D Quad Seoul
Copper 2D, quad P4 USWOH, IMS reflectors, PTS heatsink, Shark board, UCL lens. Grooved body. This runs at a nice 2a or so, plenty bright and great runtime!
$255 SOLD

Thanks for looking!

 

[ergotelis]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

Hello, the 1D mags use 1,5V battery with step up circuit?How much is the amperage draw?

 

[Essexman]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

I would also like to know more details of the 1D mags, i.e. driver, battries etc.
cheers.

 

[plasmaman]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

The 1D's are direct drive. I run them using Li D cell, or 4 x 14500 Li in an Aventrade holder.
The P4 draws 0.8a, so lots of runtime.

 

[LuxLuthor]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

Those are some nice beauties there! Are some of them bored to allow 4s 14500 cells, etc.?

 

[plasmaman]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

Those are some nice beauties there! Are some of them bored to allow 4s 14500 cells, etc.?

Thanks Lux - I've made quite a few, kind of in readiness for the uber D cell, so I need to raise some cash to pay for the batteries!
The 1D and 2D lights are not bored (except the HID which is enlarged for 4 x AA comfortably).
With these P4 lights, I have run them on Lithium D cells, or as an alternative 4 x Ultrafire 14500 Lithium in a 4P holder that you can get from Aventrade.
These 14500's will fit into a standard D body without any difficulty.

 

[leeleefocus]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

I'll take it number 4 mag hid. PM sent.

 

[plasmaman]

Re: Mags FS: 1D, 2D, 2C, HID etc etc etc

I'll take it number 4 mag hid. PM sent.

No. 4 SPF to you sir!
PM sent
Thanks.

 

[plasmaman]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

New shipping rates - free to US!!

 

[Visible EM Wave]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

I'll take #5 Mag 2D Quad Seoul. $255 + $15 (international shipping) = $270. Paypal will be sent shortly. Thanks.

 

[Visible EM Wave]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

Paypal sent. PM sent for shipping info. Thanks again.

 

[plasmaman]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

I'll take #5 Mag 2D Quad Seoul. $255 + $15 (international shipping) = $270. Paypal will be sent shortly. Thanks.

No 5 SOLD Thanks VW!

 

[stansbrew]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

:thumbsup:I will take it.....no 1

 

[plasmaman]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

:thumbsup:I will take it.....no 1

Thanks!
No 1 sold to Stansbrew. It will ship on Monday. Enjoy!

 

[Visible EM Wave]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

Received the 2D Quad Seoul. Excellent light to prepare for Halloween. :naughty:

Thanks John for your ultrafast shipping and the perfect packaging!

:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs

 

[Gointothelight]

Re: Mags FS: 1D, 2D, 2C, New shipping prices!

That purple 2c is really calling to me. Just a couple of questions... I'm familiar with fivemega products but not Kiu... would that be a bi-pin socket? Also, is the reflector cammed? I have a fixed reflector wa1111 which serves some purposes well but am now looking for an adjustable one. If it has a cam and a bi-pin socket, i don't see how I can pass it up.

 

[plasmaman]

The 2C has a Kiu socket installed - see here for a description http://www.candlepowerforums.com/vb/showthread.php?t=171607

It has a fixed postion bipin socket to hold the bulb, and the beam cannot be adjusted with a cammed reflector, as the bulb cannot move relative to the switch.
However, the usual way to achieve best beam focus is to adjust the length of the spacers between the socket and the switch. This is simple to do.
On this 2C, the bulb is already adjusted for best focus buy using correct length spacers.
To use a cammed reflector, you need to use a stock switch and an FM or similar bi-pin adaptor as a bulb holder.

 

[stansbrew]

Got My light and fired it up WOO HOO! shey is a bright one.... Great job modding this one it is a real retina burner!

Someone needs to relieve this guy of the other 2 FS they are worth it.
Thanks
Stan:twothumbs:bump:

 

[plasmaman]

Got My light and fired it up WOO HOO! shey is a bright one.... Great job modding this one it is a real retina burner!

Someone needs to relieve this guy of the other 2 FS they are worth it.
Thanks
Stan:twothumbs:bump:

Glad you like it Stan!
One more of these light sabres (#2 above) still available.

Also just realised that the 2C (#3 above) can take 2 x 18650 as an alternative to 2 x Li C. I forgot (duh) that I had done the tailcap spring mod to allow the use of either cell types. It also includes a premium PVC O ringed sleeve for the 18650's.

 

[j3bnl]

Would the 2C (#3 above) be able to use WA1185 bulbs?
What batteries were you using in the 1D Purple (#2 above) ?
Any idea of lumen output of these 2 lovely lights?