Yes, the Creemator is actually a whole family of similar lights, differing in some details. I'll try to go over some of them... note the standard price of the build is $285 (might fluctuate a little from time to time, but generally that's about right), and you have a choice of what you see below at no additional charge in most cases. (The options that would cost additional are stated as such.)
1. The head could be HA-BK as E1B, E2DL, KX1/KX2... or HA-NAT as KX1/KX2. Not all these are available at all times, but in general I can locate most of them.
1a. If you send YOUR light to be turned into a Creemator, I can do so for $165 plus shipping, and the various options below are also available for your upgrade.
2. The head uses a focusable TIR optic for great throw with capacity for fine-tuning to a specific range, degree of spill beam, and/or quality of beam. The top portion of the head is also removable for using the light as pure flood (mule-style).
2a. If you prefer a cleaner beam with more sidespill at the expense of some throw, I can install a McR19 reflector shortened for proper fit in the head... the reflectorized version of the Creemator is a $30 option.
3. The circuitry is Acorn 1.3 for max output of 303+ lumens on average... the firmware is the latest 'Bailey' revision at time of this writing, featuring 4 well-spaced levels of brightness, memory and tactical interfaces, miser mode, and more.
3a. For $30 I can customize the firmware for your specific needs, configuring the light with more/less brightness levels, changing the way the user interface behaves, calibrating various levels to the desired drive current and/or lumens, etc.
4. The body could be one cell or two cell, HA-BK or HA-NAT.
4a. For $30 I can bore out a 2-cell body to fit a 17670 rechargeable nicely.
5. The tailswitch is a standard SureFire tactical clicky.
5a. If you prefer the guarded, flared HA-BK tailswitch from the E2D and E2DL flashlights, I can supply that for an additional $10.