My blue Aspherical Maglite

[Nanomiser]

The lens.

 

[rayman]

Rayman, can you let us know how this issue is solved :thumbsup:
I am going to be using a H22A for my forthcoming Mag build

The solution is another shim ring around the heatsink which has a height of 5mm which will raise the heatsink a little bit. But the problem with not getting a sharp die is only with the H22A heatsink in combination with the MG LAG011 aspherical lens. Which lens will you use in your mod?

rayman

 

[tx101]

I am going to use the MG 123 lens

Maybe you should shim the emitter itself ???

 

[Icarus]

Best solution would be to use a custom made heatsink. :)

 

[Nanomiser]

If you have those resources available to you, then yes, starting from scratch would be the cleanest solution, but a lot of work for a simple problem.

Personally I think the shim ring is also a very clean fix and a lot less work. :)

 

[drillbritz2ov]

Very nice blue is my favourite colour . So gotta have one .I am currently modding a silver 2d maglite into an rop hotwire and your blue led maglite is giving me some serious doubts. I do so like the blue gitd halo its adds a touch of class . Looks like i gotta and get a blue 2d maglite to mod into a led beauty similar to your own effort . Very nice and the bezel just tops it off . Lol cliff

 

[jasonck08]

One word: beautiful!

 

[Robo-Man]

rayman where did you buy the aspheric?
where there any problems with the duty(zoll)?

 

[tx101]

rayman where did you buy the aspheric?
where there any problems with the duty(zoll)?

KD = Kaidomain

They post in the dealers section in the Marketplace :)
Just a heads-up ... they can be slow with shipping

 

[Nanomiser]

rayman where did you buy the aspheric?
where there any problems with the duty(zoll)?

KD does sell the cheaper aspheric here KD4167, but if you are looking for a higher quality optic and don't mind spending a bit more buy a CVI Melles Griot aspheric here LAG-52.0-37.0-C also consider the optional A.R. coating (Anti-Reflective) MF-400-700. The protective bezels you can find here. :naughty:

 

[tx101]

KD does sell the cheaper aspheric here KD4167, but if you are looking for a higher quality optic and don't mind spending a bit more buy a CVI Melles Griot aspheric here LAG-52.0-37.0-C also consider the optional A.R. coating (Anti-Reflective) MF-400-700. The protective bezels you can find here. :naughty:

I think Robo is non-US ???
I dont think Melles Griot ship outside of the US
I got my one thru Unforgiven's forwarding service

@Robo .... the Melles Griot lens is brighter than the KD lens, might be worth
the effort in trying to get hold of one.

 

[Robo-Man]

im from germany so there might be some problems^^

i can add the lense to my cart and check out but then there is this sentence:
" For non-USA shipments a completed Department of Commerce
export document is required."

and i do not realy know what to fill in ;)
i already sent an email but i got no response.

 

[mash.m]

hi robo-man,

you can you the new website to order:

http://www.cvilaser.com/PublicPages/Pages/default.aspx

there will be a general office in holland (alex, master-websales also speaks german). ordering is no problem, but you need a creditcard like mastercard.

if you have any questions about ordering from cvi you can pm me in german. i have the phone number and adress here.

markus

 

[Hugo2x]

where did you find a bare R2 emitter? or did you harvest one from a star board?:candle:

 

[rayman]

I found an online-shop in Germany which sold them at that time. Don't know if the still have them.

rayman

 

[Nos]

led-tech.de and leds.de both have bare R2's

 

[Hugo2x]

I managed to harvest an R2 from a board and got mine done, it works great for night disk golf :twothumbs

 

[The_Police]

That has to be the sickest, most bad@ss Maglite mod I have ever seen.... :D
5 stars man. I love it...

 

[The_Police]

how far out does the aspherical lens stick out?? I was planning on machining my own bezel, is 1 1/2inches long enough??

 

[rayman]

Sorry for answering so late, didn't see the post. I don't have the lens at the moment because I'm moving right now. But at the end of the week I can measure it.

rayman