NightPro 2x12W halogen to 6xSSC P4 with MaxFlex

[Tidra]

NightPro 2x12W halogen to 6xSSC P4 with MaxFlex

Picture should tell 1000 of words...



Material:
- NightPro 2x housing, battery 6V/8Ah, charger and mounts
- 6x SSC P4 U-bin
- 2x MaxFlex
- Custom made heatsink for LED's
- Custom made holder for MaxFlex
- 2x momentary switch's
- 2x Khatod optic
- 2x triple connectors

Khatod optics:
http://www.optomarket.com/epages/Optomarket.storefront/490874410091844c273f3e6ce54a0650/Product/View/PL60106

I use two MaxFlex, because with small modification, extra battery and connector there is a possibility to split in to two separate light systems, one for handlebar and one for helmet.

Both MaxFlex are set to 700mA which should give approximately 1000Lum when both lights are set to maximum.

Unfortunately housing of this light is totally NOT weatherproof.

LP
Iztok

 

[Tidra]

And of course beamshoot....

Halogen 15+20W



LED 6xSSC P4 @ 700mA



Iztok

 

[FrontRanger]

Final product looks nice and clean, Tidra. Can you not make it waterproof with a little silicone, or similar sealant? And are both of your lenses identical?

 

[snaps]

I found room in the Nightpro's for two quad R2 kits!

 

[Tidra]

Ofcourse, no problem, both lenses are fi35mm.

Do you have any beamshoots?

Thank you,
Iztok

 

[snaps]

Not yet, its pouring with rain here!