Nitecore EX10 clip

[Energie]

Homemade aluminium-ring, stainless-steel clip.
The two outer scews are 1/10 mm longer than
the thread in the ring.

 

[Valpo Hawkeye]

OK, seriously... do you think we're going to let you off that easy? Details!

 

[glockboy]

How about this?

 

[TranquillityBase]

Nice mod Energie:twothumbs

glockboy, where/what's the three screws clip from?

Thanks,
Scott

 

[glockboy]

From my pocket knife.

glockboy, where/what's the three screws clip from?

Thanks,
Scott

 

[TranquillityBase]

From my pocket knife.

Nice!

Looks to be a perfect fit.

 

[houtex]

Energie,how does the clip hold on to the light?

 

[Energie]

glockboy,
nice clips!

houtex,
the aluminium ring fits over the body without any play.
The outer two screws are 1/10 mm longer than the threads in the ring.
The screws press against the wall of the body.
No wobbling of the clip. And no marks on the body when the clip is removed.
I did not want to bore the body because it is 1,3 mm thick, not enough
for solid threads in my opinion.

 

[pyromaniac]

Another "Made in Germany"




This clip is home-made.
It's made of 0,6mm spring-steel. The edges are troweled and the surface is brightly polished. The screws go throught the existing holes of the Flashlight without threads. Attached to a small sheet of iron with threads on the inside.

 

[Jarl]

Please tell me you're going to sell those clips, pyro!!

 

[lightsandknives]

Nice job everyone! I'm patiently waiting until some become available for those of us without the talent to make our own!

 

[swxb12]

Wow, outstanding work on the clips, guys!

Energie that is some serious beef you got there with your clip. Very sturdy looking.

 

[IsaacHayes]

GREAT work pyro!!!! That's how the clip should be offered! Great way of attachment to the existing light! Sturdy and nice shape of the clip too!!!

I'm down for one if you make em!!

 

[nanotech17]

pyromaniac :wow:
nice :thumbsup:

 

[Norm]

GREAT work pyro!!!! That's how the clip should be offered! Great way of attachment to the existing light! Sturdy and nice shape of the clip too!!!

I'm down for one if you make em!!

+1 Very nicely done Pyro, could easily be sold as a kit for folks with access to nothing more than a screwdriver.
Norm

 

[Sgt. LED]

7777's ought to take a peek at these!

 

[bfg9000]

Awesome clips, would love to see one tig welded to the SS bezel ring!

 

[Cosmo7809]

Sorry to bring up a rather old topic but do you think any of these will work on a EX10?
http://www.knifekits.com/vcom/index.php?cPath=60_101

 

[mitch79]

Sorry to bring up a rather old topic but do you think any of these will work on a EX10?
http://www.knifekits.com/vcom/index.php?cPath=60_101

Well this one looks identical to the one Glockboy used.
4sevens is releasing their clip for the D10 & EX10 in a weeks time if you can wait.

 

[Cosmo7809]

Yes it sure does! Thanks