Norland 61, TRIT potting service for free in Bay area

[goldserve]

Hi Guys/Gals,

I am offering people that can drive over to my place in the Bay area to cure their TRITS using Norland 61 stuff for FREE. You must be able to come over to my house after 8pm and on weekdays only from NOW till Nov 5th, Nov 23rd - Dec 15th.

Thanks to DON, I am the proud owner of a very high powered UV led that is in the right wavelength to cure the Norland 61 epoxy. If you have any other uses other than trits, you are welcomed as well. Cheers!

Please use the fourm's E-MAIL service to contact me and arrange a time. Cheers!

 

[goldserve]

No one needs it eh? Well, I'm open if someone wants to put this as a sticky for a month or two...

 

[Beamhead]

What light and where can I get one?

 

[vacuum3d]

That's very kind of you. I don't have any Trit, but I don't mind coming over to pick up a couple of flupics, and have pizza or something

ernest

 

[goldserve]

If you have those ES-CANS and a small file, I'll can put a piglet into the es-can =D

Got any lights that need trits? I got one blue one left...

 

[goldserve]

What light and where can I get one?

The light is a custom light I built.

-Don sold me Nichia 365nm uv led on a es-screw
-piglet driver board with 150-500-650ma configuration
-Aleph ha-nat 19 head
-mcr-19 reflector
-1 cr123 ha-nat body
-mc clicky tail switch
= SWEEEEET

 

[vacuum3d]

Well, I got one of those A2 bezel bezel rings that has the trit cutout. If your trit fits, I'll take it. The flupics I mentioned are the small ones for Arc AAA heads that I talked to about. However, I'm interested in the piglet. Is that the one that works along with some other driver, or the one you showed me that does buck/boost?

I'll PM for address/phone #.

thx,
ernest

 

[goldserve]

piglet is buck/boost. I'm gonna reply to your PM now...