Hi everyone,
I am new in the forum, in fact I came upon this site while searching for information on LEDs.
Anyway, I planned to DIY a small light Panel using LEDs for video taking in low light area or just dim it down to use as fill in lights.
In the process of search and trying the LEDs, I can't seem to find one with the correct colour temperature of around 5600K (daylight). Most LEDs that claim to be Daylight are all Cool daylight which already had a blueish tint. Look quite bad on video esp the skintone.
So I need some help here to suggest or narrow down the LEDs that I can try on.
My requirement:
1) To build a small panel of LEDs (5600K, High CRI) array (depend on the brightness of the LEDs, can mount 4 to 40.... as long as it can fit into a 10x10cm board.
2) Able to light up wall about 3x3m when the light is place 2m away from the wall. And able to thow the light far as far as 8m
3) Light intensity fall on the subject is adjustable, by a variable potential meter.
4) Simple circuit wiring if possible, like from battery connect to potential meter then parallel to all the LEDs. Hopefully no LEDs drivers needed.
5) Able to power by 4 x AA Rechargable (2600mAH) battery and can lasted for at least 3 hrs of usage.
So I need some expert input as in which LEDs should I choose and if this spec if even possible to meet in the first place.
Thanks in advance.
I am new in the forum, in fact I came upon this site while searching for information on LEDs.
Anyway, I planned to DIY a small light Panel using LEDs for video taking in low light area or just dim it down to use as fill in lights.
In the process of search and trying the LEDs, I can't seem to find one with the correct colour temperature of around 5600K (daylight). Most LEDs that claim to be Daylight are all Cool daylight which already had a blueish tint. Look quite bad on video esp the skintone.
So I need some help here to suggest or narrow down the LEDs that I can try on.
My requirement:
1) To build a small panel of LEDs (5600K, High CRI) array (depend on the brightness of the LEDs, can mount 4 to 40.... as long as it can fit into a 10x10cm board.
2) Able to light up wall about 3x3m when the light is place 2m away from the wall. And able to thow the light far as far as 8m
3) Light intensity fall on the subject is adjustable, by a variable potential meter.
4) Simple circuit wiring if possible, like from battery connect to potential meter then parallel to all the LEDs. Hopefully no LEDs drivers needed.
5) Able to power by 4 x AA Rechargable (2600mAH) battery and can lasted for at least 3 hrs of usage.
So I need some expert input as in which LEDs should I choose and if this spec if even possible to meet in the first place.
Thanks in advance.