LED Zeppelin
Flashlight Enthusiast
This light is SPF, thanks CPF!
This is a versatile setup, and since Mike also modded a Superflashlight (almost identical to this one) for me, I'm going to let this one go.
Here is what's included:
- (1) HLV head, #093, mint. Arcmania/Kato modded with a cut McR38, SSC P4 emitter, ROF multi-function down converter (same as in the Digital Tower Module). Multifunctions include low, medium, high, blink, fast blink, marker, strobe, wave, hi/low, heartbeat and SOS. Voltage range is Vf to 12V, so pretty much anything you can fit in either tube will work.
- (1) 3 X 123 TnC tube. Anodize blem as pictured, one side is lighter with a splotchy transition.
- (1) Combat grip tube, TnC bored this to fit 1 X 18650. There is a pre-ano scuff in the first shoulder below the head. I tried to capture this in the last pic, but the ano masks it well. This setup works well with flat-top or button cells, cell loads from the front. Ano is a bit darker on this tube as pictured. Cell not included.
- (1) TnC clicky tail w/ Kroll, mint, but threads seem a bit loose, but nothing is visibly wrong - just need a bit of care when threading. Works perfectly, no skipping or contact-bounce-induced mode shift with the ROF.
Here is a diagram of the UI. It's easy to master.
$375, $350, $325, plus I'll include the 18650 pictured, shipped priority in US, add $10 for international priority.
This is a versatile setup, and since Mike also modded a Superflashlight (almost identical to this one) for me, I'm going to let this one go.
Here is what's included:
- (1) HLV head, #093, mint. Arcmania/Kato modded with a cut McR38, SSC P4 emitter, ROF multi-function down converter (same as in the Digital Tower Module). Multifunctions include low, medium, high, blink, fast blink, marker, strobe, wave, hi/low, heartbeat and SOS. Voltage range is Vf to 12V, so pretty much anything you can fit in either tube will work.
- (1) 3 X 123 TnC tube. Anodize blem as pictured, one side is lighter with a splotchy transition.
- (1) Combat grip tube, TnC bored this to fit 1 X 18650. There is a pre-ano scuff in the first shoulder below the head. I tried to capture this in the last pic, but the ano masks it well. This setup works well with flat-top or button cells, cell loads from the front. Ano is a bit darker on this tube as pictured. Cell not included.
- (1) TnC clicky tail w/ Kroll, mint, but threads seem a bit loose, but nothing is visibly wrong - just need a bit of care when threading. Works perfectly, no skipping or contact-bounce-induced mode shift with the ROF.
Here is a diagram of the UI. It's easy to master.
$375, $350, $325, plus I'll include the 18650 pictured, shipped priority in US, add $10 for international priority.
Last edited:
anyway.
