Original asking Price $235
Price Reduced to $195
2/5/ Now $190
2/6/ Now $185
This is a Rare McGizmo HD45 in HA-NAT,
It came out of the First Run & Only 12 were Made.
See Post #22/23 below in the HD45 thread regarding HA-NAT.
http://candlepowerforums.com/vb/showthread.php?t=91239
This one of 12 HA-NAT but the only HD45 I know sports a modern cree XPG. It's the nailbender XPG R4, pure white tint without the Green tint seen from either Cutter XPG or 4 Sevens XPGs used in the Quark Ti.
The Original board burned out, so I swapped in a 3 speed low/Mid/High driver, No annoying strobe/SOS etc. So the light is now 3 level twisty. But the driver was made for clicky, the twist action doesn't seem to be fast enough to change modes consistently, so it doesn't always always go L-M-H, some times skip or jump modes. But it does give you all 3 modes.
Use 1x18650 only, as the driver is for single Li-ion use, do not use 2x123 in there.
The hardest part is to open the head & change the LED. If you don't like the driver, the driver is quite easy to access & change. I've left enough wire so that Driver can be changed without getting into the head.
I've seen many Black HD45 for sale, but rarely HA-NAT, the only reference I found is here: http://www.candlepowerforums.com/vb/showthread.php?t=120127
It was sold for $275, with just a lowly LuxIII in it.
So I think I am asking $235 for the light is pretty fair price, for the
one & only McGizmo HA-NAT HD45 with XPG in it.
I'll include one 18650 Battery with the light.
USA Only. Please add $18 to cover PP fee/Shipping & Insurance.
If you use Personal Fund to avoid fee, It'll be just $8 for Shipping/Insurance.
Price Reduced to $195
2/5/ Now $190
2/6/ Now $185
This is a Rare McGizmo HD45 in HA-NAT,
It came out of the First Run & Only 12 were Made.
See Post #22/23 below in the HD45 thread regarding HA-NAT.
http://candlepowerforums.com/vb/showthread.php?t=91239
This one of 12 HA-NAT but the only HD45 I know sports a modern cree XPG. It's the nailbender XPG R4, pure white tint without the Green tint seen from either Cutter XPG or 4 Sevens XPGs used in the Quark Ti.
The Original board burned out, so I swapped in a 3 speed low/Mid/High driver, No annoying strobe/SOS etc. So the light is now 3 level twisty. But the driver was made for clicky, the twist action doesn't seem to be fast enough to change modes consistently, so it doesn't always always go L-M-H, some times skip or jump modes. But it does give you all 3 modes.
Use 1x18650 only, as the driver is for single Li-ion use, do not use 2x123 in there.
The hardest part is to open the head & change the LED. If you don't like the driver, the driver is quite easy to access & change. I've left enough wire so that Driver can be changed without getting into the head.
I've seen many Black HD45 for sale, but rarely HA-NAT, the only reference I found is here: http://www.candlepowerforums.com/vb/showthread.php?t=120127
It was sold for $275, with just a lowly LuxIII in it.
So I think I am asking $235 for the light is pretty fair price, for the
one & only McGizmo HA-NAT HD45 with XPG in it.
I'll include one 18650 Battery with the light.
USA Only. Please add $18 to cover PP fee/Shipping & Insurance.
If you use Personal Fund to avoid fee, It'll be just $8 for Shipping/Insurance.
Last edited:
