Sold/Expired SOLD: Orb Raw Ti Clone, XPG R5, 10180.

[ma_sha1]

Up for sale, is another keychain light I made for fun.

It's got the shape of Orb Raw, but smaller
With battery in, Weight in at 1/2 of my Orb NS ( 6 Oz vs. 12 Oz)
Made from Ti Key as host
Bored out the head & installed XPG R5
Using the New Lisa 2 XPG Real Spot optics
Runs on 10180 Li-ion Direct Drive
Using the Ti natural resistance, it pulls around 600 MA.
Snow white tint, no green, no blue
Tiny Tiny Tiny, bright, bright, bright.
Show between a AA battery & Raw.

A raw Ti XRE will cost about $250,
I am selling the Ti clone XPG for $85. Include one 10180 Li-ion.
Add $4 for shipping/PP fee. USA Only.

 

[FroggyTaco]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Is that orange wire just there to keep the tube from rolling?

 

[Eric242]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Äh, I don´t get it. Which is the light for sale? I see the Orb Raw NS and obviously a modded Ti ThruNite that does not look like nor has the shape of an Orb Raw.

Eric

 

[F250XLT]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Äh, I don´t get it. Which is the light for sale? I see the Orb Raw NS and obviously a modded Ti ThruNite that does not look like nor has the shape of an Orb Raw.

Eric

The modded ThruNite is his version of an Orb Raw Ti clone, quite a stretch, but I think that is what he is getting at.

 

[Eric242]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Hm, that´s quite a stretch indeed

 

[ma_sha1]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Sorry for the stretch as a "clone", but it won't one's wallet :devil:

 

[ma_sha1]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Is that orange wire just there to keep the tube from rolling?

The wire is un related. It's just happen to be there,
I haven't get to clean the table up before the photo.

 

[David Gretzmier]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

I want it- My second mod from you I think- need your paypal email? thanks, dave g

 

[ma_sha1]

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Thanks Dave,

PM sent with my PP info.

 

[David Gretzmier]

Re: SPF: Orb Raw Ti Clone, XPG R5, 10180.

89 bucks- please ship to my paypal shipping address. should be david gretzmier, 613 mill and then the city, state,zip do not send to the PO box number 443. thanks, dave g

 

[David Gretzmier]

Re: SPF: Orb Raw Ti Clone, XPG R5, 10180.

I was mistaken about this being my 2nd light. just the first ! hey, does purchasing a light from you get me into the secret club that finds out how you did the duracell aaa light?

 

[ma_sha1]

Re: SPF: Orb Raw Ti Clone, XPG R5, 10180.

Sure, you have earned a key to the door of "secret club"
It's a 5mm led flashlight that I peeled the AAA warper & wrapped around it

Since it's identical looking to my other AAA batteries, I can't find it anymore,
so the secret is burried forever with the flashlight that went MIA.

I printed your shipping label, everything looks correct vs. what you said above except your PP address didn't have a name, so I added your name on top.

It's going out right now.

 

[David Gretzmier]

light came today. love it ! went on my keychain pronto. very bright, probably brighter than my 100 lumen orb wee and when fresh off charger , brighter than my 200 lumen raw al. wish it had a slightly bigger battery than a 10180, it looks like a 12180 would fit without the faom tape that is in there to keep the 10180 from rattling. but I don't think there is such a battery . but I do love it. Thanks !

 

[ma_sha1]

light came today. love it ! went on my keychain pronto. very bright, probably brighter than my 100 lumen orb wee and when fresh off charger , brighter than my 200 lumen raw al. wish it had a slightly bigger battery than a 10180, it looks like a 12180 would fit without the faom tape that is in there to keep the 10180 from rattling. but I don't think there is such a battery . but I do love it. Thanks !

Thanks for the feedback, I am glad you liked it! It is very bright indeed.

It would also fit 14180 if there is such a battery
Because I first spent 3 hours to bore out the tube to fit 14250, after I put the 14250 in, I realized that the tube is too short, no room for the head to go in. That was kind of dumb for me, what a waste of time

But if in the future that AW introduces 12180, 13180 or 14180, you are ready for them :laughing:

 

[David Gretzmier]

egads, the difference in length of the 10180 and 14250 is only 7 millimeters ! I knew a 14250 would fit in there, just won't thread. you have got to figure out the easy/cheap way to make the shortest 14250 xpg r5 dd and sell those suckers as keychain lights. maybe the shortest AA and cut out an inch. I saw the stainless mod you did/sold ( shoulda bought that one ) , kinda a raw SS clone. you gonna do a brass 14250 xpg up next?

 

[ma_sha1]

you gonna do a brass 14250 xpg up next?

Funny you asked, I love brass lights & have a Brass Cr2/14250 XPG R5 light planned,
just won't have time for a few weeks, as I am busy playing with Aspheric right now

It's going to be the shortest CR2 clicky ever, kind like a Raw with a clicky tail, in brass, XPG R5 .
.
.