KillingTime
Newly Enlightened
***NOW SOLD***
Hi Folks,
[Scroll down for outdoor beam shots]
Up for sale is my MagC SST90. I have too many lights, so this is going. Reduced to 55 GBP plus shipping.
[The emitter alone was 35GBP...]
1. There are no marks on this flashlight.
2. The emitter is the highest bin (2200 lm). I don't have the receipt to prove it, but I remember buying it from a Luminus authorized dealer.
3. The driver is a Der Wichtel 9A buck. http://www.candlepowerforums.com/vb...icient-5A-9A-Buck-Converter-for-SST-50-SST-90
4. The heat-sink and reflector are from Britelumens: http://www.candlepowerforums.com/vb...0-MAG-C-D-Deluxe-Heatsink-***Ready-to-ship***
5. Host is a Mag 2C in black.
You'll need to supply two IMR batteries. As the driver is a switch mode buck, the output will remain constant until the converter is unable to maintain regulation due to low battery voltage. This happens on this converter at 5.3v input, which works out at 2.65v per cell; well within the safety limit for IMRs. At 5.3V the light will flicker.
This light runs at approx. 40W, and it's really bright.
The converter used in this project was tested here (see my post 134):
http://www.candlepowerforums.com/vb...ST-50-SST-90&p=3670275&viewfull=1#post3670275
I'm in the UK, but will ship to UK, Europe, USA and Australia.
To find your shipping cost, please use the royal mail price finder: http://www.royalmail.com/price-finder
Weight is 500g. Select 'packet' and 'delivery confirmation'.
FYI:
Shipping to the USA is about 13.50 GBP.
Shipping to the UK is 3.65 GBP.
Thanks for looking.
Hi Folks,
[Scroll down for outdoor beam shots]
Up for sale is my MagC SST90. I have too many lights, so this is going. Reduced to 55 GBP plus shipping.
[The emitter alone was 35GBP...]
1. There are no marks on this flashlight.
2. The emitter is the highest bin (2200 lm). I don't have the receipt to prove it, but I remember buying it from a Luminus authorized dealer.
3. The driver is a Der Wichtel 9A buck. http://www.candlepowerforums.com/vb...icient-5A-9A-Buck-Converter-for-SST-50-SST-90
4. The heat-sink and reflector are from Britelumens: http://www.candlepowerforums.com/vb...0-MAG-C-D-Deluxe-Heatsink-***Ready-to-ship***
5. Host is a Mag 2C in black.
You'll need to supply two IMR batteries. As the driver is a switch mode buck, the output will remain constant until the converter is unable to maintain regulation due to low battery voltage. This happens on this converter at 5.3v input, which works out at 2.65v per cell; well within the safety limit for IMRs. At 5.3V the light will flicker.
This light runs at approx. 40W, and it's really bright.
The converter used in this project was tested here (see my post 134):
http://www.candlepowerforums.com/vb...ST-50-SST-90&p=3670275&viewfull=1#post3670275
I'm in the UK, but will ship to UK, Europe, USA and Australia.
To find your shipping cost, please use the royal mail price finder: http://www.royalmail.com/price-finder
Weight is 500g. Select 'packet' and 'delivery confirmation'.
FYI:
Shipping to the USA is about 13.50 GBP.
Shipping to the UK is 3.65 GBP.
Thanks for looking.
Last edited: