SSC P7 Li-ion 5-mode driver

[ttolya]

Hi,
I am just starting playing with LED's and I got this driver from Kaidomain and for the life of me can't work out how to wire it up as there were no instructions. Anyone got a picture of one wired up or able to tell me how to connect it.
Cheers

 

[Al Combs]

:welcome:

What's the ProductID of your board? FWIW, in that price range, the pictures on KD's web page ARE the directions.

 

[ttolya]

Al the code is SKU: S005025 I don't follow what you are saying by the connections are shown in the pictures from Kiadomain. All that I can see are the 2 wires which must either be input or output. I would not have thought you would have just put them in line if you follow. I should am my electrical knowledge is very basic so bear with me please.

 

[nailbender]

The brown center wire on that driver is the led + and the other blue wire is the led-

The center gold spot on the other side is the batt. positive and the outer four gold spots are the batt -

 

[ttolya]

Thanks Nailbender that is what I was after.

 

[old4570]

Middle = + [ Brown ]
Outer edge = - [ Blue ]