Xcurrent93
Newly Enlightened
- Joined
- Jul 27, 2019
- Messages
- 4
hello all
i need help with getting out of muggle mode on my Reylight triple Ti Dawn V2. It has the TA driver with TK bistro 23 uI
I got to were I was comfortable with the UI , even hidden modes. and then I got stuck Muggle mode.
i have 1/2 pressed /full click/taken battery out / all when it flutters. I tried at the begging of the flutter the end every possibility I think I have tried. But it stays in 3 mode and when I 14+ 1/2 press to go to the menus it only gives the 1 blink for muggle. Frustrating!! What al I doing wrong? PLEASE HELP!
here is the instructions-
The following Configuration Mode numbers below are depicted by the number of Solid Flashes, followed by strobe flashes.
There is a total of 8 Configuration Modes as shown below, 1/2 Press Switch to select current Configuration Mode.
If none of the Configuration Modes is selected after 1 full cycle, the flashlight will revert back to lowest Mode.
i need help with getting out of muggle mode on my Reylight triple Ti Dawn V2. It has the TA driver with TK bistro 23 uI
I got to were I was comfortable with the UI , even hidden modes. and then I got stuck Muggle mode.
i have 1/2 pressed /full click/taken battery out / all when it flutters. I tried at the begging of the flutter the end every possibility I think I have tried. But it stays in 3 mode and when I 14+ 1/2 press to go to the menus it only gives the 1 blink for muggle. Frustrating!! What al I doing wrong? PLEASE HELP!
here is the instructions-
- Once in configuration mode, the light will give a solid flash between 1 and 8 times to depict the 8 available configuration items.
- The number of solid flashes indicates the option number to be changed and are followed by strobing flashes (I.e. 2 Solid Flash followed by strobe flashes means Configuration Mode 2)
- Subsequent 1/2 Press Switch – Select current Configuration Mode item <<~I have tried every press type. ->1/2 press full click / all
The following Configuration Mode numbers below are depicted by the number of Solid Flashes, followed by strobe flashes.
There is a total of 8 Configuration Modes as shown below, 1/2 Press Switch to select current Configuration Mode.
If none of the Configuration Modes is selected after 1 full cycle, the flashlight will revert back to lowest Mode.
- Simple/Muggle Mode Activation – 3 modes (LOW, MID & HIGH only, with HIGH at about half power)
- Mode cycles LOW, MID, HIGH -> LOW, MID, HIGH.
- MOONLIGHT, Memory, Medium-presses and Hidden Modes are all disabled in this Mod why! At least keep the option to reset for cases like this! The other modes should always be available!!
- When in this Simple/Muggle Mode, Configuration Mode will only show this option to exit Simple/Muggle Mod <~~easier said then done . It keeps going back to 1 blink for muggle mode and not 2-8 for the rest of the menu items to choose