andromeda.73
Banned
hello, has anyone tried this kind of combination? you know if there are problems with this battery? I use both with the P60L lamp that P61. thanks.
First, i do not think a 18650 will fit into the G2 battery tube. Even if it did, the voltage (3.7v) may not be enough to power the LED (2xCR123=6.0v).
Thirdly, this post should be in the LED section as you are asking about a G2 LED not an incand G2.
if i remember correct. 18650 is 18mm wide and 65mm long vs 17670 is 17mm wide and 67mm long and 0 is for it's round.
correct me if i'm wrong
thanks for the replies, when I can 'will' if there are differences with the other batteries.
forgot
anyway I'm 'talking about the battery 18650th and 17650th as you have said you. What are the differences between these two?
-No, a 6V Xenon lamp needs 6V, it will be very dim with a single cell, and in some cases it drastically reduces bulb life (surefire A2 for example).should be corrected, but I wanted to know is if they work properly, both with the form that led to that Xenon :thinking: