Ti tail extensions for E-series,Z58/59,L1/L2 >>DELUXE<< E-SERIES TAILS

[Moddoo]

UPDATE AUGUST 2011

THESE ARE SOLD OUT.

There has been interest expressed in another run of tails for the e-series.

Please reply to this thread to show your interest.

Thank You


E-tails below:

Please share any ideas you have.

 

[Muddquez]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I'll take two at least.

 

[litetube]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

Wow. I think you would get a large interest in this. I have a E series SF and would be interested in one. Same for the clip. a reverse style will probably be most popular on the clip. Anything in Ti is gonna be hungered for on CPF!!

 

[Cosmo7809]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I think I might want one, depending on price and pictures

 

[DUQ]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I would buy a plain one if you can build some for the A2, L1/L2

 

[toby_pra]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

Did you perhave a pic?

 

[Sgt. LED]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I want one SF E series Ti tailstanding ring!

Not too interested in a clip variety at this time.

 

[Moddoo]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

Did you perhave a pic?

No, no parts yet.

The extension could turn out something similar to this.

or as simple as this

 

[Sgt. LED]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I'd like one like the bottom pic but slightly flared so access to the button is a bit easier, no crennelation, shiny Ti. :thumbsup:

Like this!

 

[Moddoo]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

best I can do is a flare to about .825"
E tail is about .795"

I will make the very end opening as large as possible, tapering down to the switch.

a triple cren would allow more room for a thumb...

I'll try to whip up a simple proto tonight.

 

[Sgt. LED]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

COOL .825 should be big enough.

If the crens can be nice and smooth then that's fine. Do you think a 3 prong is stable enough?

 

[Moddoo]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

COOL .825 should be big enough.

If the crens can be nice and smooth then that's fine. Do you think a 3 prong is stable enough?

I'll have to try a couple things.
I think I would prefer the smooth round, w/o crens.

We'll see what the rest of the crowd wants too.

 

[gunga]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

If it's not too costly, I'm definitely interested...

 

[Sgt. LED]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

Great.

Do you have any project threads that I haven't butted in on yet? LOL

 

[MorpheusT1]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

Cool,


I would be in for some Flared delrin tail extensions both for the E series and L1/L2/A2 Series tailcaps.

Crenulations would be cool but not a must.

Do you have both E-series tailcaps and L1/L2/A2 tailcaps?
The last 3 share the same tailcap so thes would sell for sure.

Benny

 

[Moddoo]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

Cool,


I would be in for some Flared delrin tail extensions both for the E series and L1/L2/A2 Series tailcaps.

Crenulations would be cool but not a must.

Do you have both E-series tailcaps and L1/L2/A2 tailcaps?
The last 3 share the same tailcap so thes would sell for sure.

Benny

I am only planning on making Ti parts right now.

Delrin ones may still be available from another member?? not sure.

I do not have an L1/L2/A2.
Can anyone confirm that the threaded ring is identical in those tailcaps?

 

[Sgt. LED]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

L1/L2/A2 are the same but not the same as the E series. Well I'm 90% sure anyway...........

 

[Moddoo]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

L1/L2/A2 are the same but not the same as the E series.

ah, crap.

(moddoo goes shopping...)

 

[Sgt. LED]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I can send you a free stock A2 ring if it'll help.

 

[Moddoo]

Re: Titanium tailstand extension for E-series with bezel down clip - any interest??

I can send you a free stock A2 ring if it'll help.

That would be great, but I'll need the whole tail to check fitment of rubber button, to ensure watertightness with new parts.

let me know, I really don't need an expensive stock incan right now.