vinhnguyen54 D26/P60 XML Drop In Run 7 Sale Thread ALL COPPER PCB SOLDER FILL NOW

[Xmldriver]

I'd like to take one to go in a Fivemega D26 Mag parallel 18650 host, so pretty good heatsinking as the head and body are all one piece. Looking for a yard sweeper, that I can use for at least a few minutes on high without shutting it off, so I think 4,090mah is about right? (unless you have a better suggestion, if you think I can go more and still get a few minutes without getting too hot to hold?):

1. Neutral 5000K,
   4,090mA => + $3 to price
2. Always start on High
   Moonlight, Medium, High
3. Orange Peel Reflector
4. copper pcs and Solder fill

I think that's $48 all in - can't wait!

 

[Xmldriver]

Paypal sent

 

[Skylumen]

4.2A is fine Just throttle down to Medium if it gets too hot.

 

[kengps]

What is the limit on a 2900 mAh Li-ion AW battery? Will it supply 4.8A for 30 seconds? Or do I need IMR? I'm looking for about 30 seconds on high at the most, then Med after that. When you say "Medium is 35%" does that mean, 35% of 3.04A or 35% of the Maximum I choose?

Multi-Mode 2.7-4.5V
XML-U2 on Copper PCB
4790 mAh
No Memory, Always Start on High, then Medium, Low Low.
Light OP Reflector


(edited to add moonlight and changed to XML-U2)

$45+$5 = $50 Total correct?

 

[Skylumen]

4.8A for 30 seconds easily! 35% of High chosen current. Price is Correct.

What is the limit on a 2900 mAh Li-ion AW battery? Will it supply 4.8A for 30 seconds? Or do I need IMR? I'm looking for about 30 seconds on high at the most, then Med after that. When you say "Medium is 35%" does that mean, 35% of 3.04A or 35% of the Maximum I choose?

Multi-Mode 2.7-4.5V
Neutral 5000K on Copper PCB
4790 mAh
No Memory, Always Start on High, then Medium.
Textured Reflector

$45+$5 = $50 Total correct?

 

[kengps]

OK, Paypal sent. Can I make a change? I've decided XML-U2 and I want three modes. Always start High, then Medium, Moonlight. Thanks.

I edited my original post to show the requested changes. Paypal order details I cannot edit.....I need a Mcklicky also. You have any yet?

 

[Skylumen]

Re: vinhnguyen54 D26/P60 XML Drop In Run 7 Sale Thread, COPPER PCB NOW AVAILABLE

Shallow reflectors are SOLD OUT. Only have Deep OP, Light OP, and Smooth left. Moonlight Drivers are replaced with LowLow drivers instead. Moonlight is a bit impractical as opposed to LowLow.

 

[Casper507]

Will you be getting more of the shallow reflectors?

 

[kengps]

Is the difference between "Light OP", and the "Deep OP" the texturing? or are the reflectors different shape? I want smooth beam, but I still want the best throw I can get.

 

[Skylumen]

Will you be getting more of the shallow reflectors?

For now I am
not able to.

 

[Skylumen]

The light op, heavy op, n smooth are all deep reflectors. Their hot spot I intensity and quality is the biggest diff. The best balance of nice beam n throw would be light op.

 

[kengps]

Got my P60. This thing is HOT! Love it. Thanks.

 

[kengps]

Any idea what the OTF lumen numbers are? specifically an XML-U2, 4.8A drop-in, with a UCL lens?

 

[Skylumen]

Any idea what the OTF lumen numbers are? specifically an XML-U2, 4.8A drop-in, with a UCL lens?

\

OTF I don't know but LED lumen are on this graph: http://budgetlightforum.com/node/10267

 

[bxstylez]

$53.00

1 x XML-U2 Cool White COPPER PCB w/ extra thick solder fill
--- Multi-Mode High Current & Low Voltage option: 2.7-4.5V max
--- 5,840mA (3,040mA + 350mA*7 = 5,840mA => + $8 to price)
--- No mode memory
--- High, Medium, LowLow, High, Medium, LowLow, 10Hz Strobe, 2HZ Blink, SOS, Beacon
--- Smooth= Best throw, Slight donut hole effect, Most OTF Lumen


Price: $45 base price + $8 current increase = $53.oo
please mount/tape the FREE aluminum adhesive onto the reflector

.

 

[Skylumen]

$53.00

1 x XML-U2 Cool White COPPER PCB w/ extra thick solder fill
--- Multi-Mode High Current & Low Voltage option: 2.7-4.5V max
--- 5,840mA (3,040mA + 350mA*7 = 5,840mA => + $8 to price)
--- No mode memory
--- High, Medium, LowLow, High, Medium, LowLow, 10Hz Strobe, 2HZ Blink, SOS, Beacon
--- Smooth= Best throw, Slight donut hole effect, Most OTF Lumen


Price: $45 base price + $8 current increase = $53.oo
please mount/tape the FREE aluminum adhesive onto the reflector

.

I don't suggest going over 5.5A...Beside there are no space for 7 7135....

 

[bxstylez]

I don't suggest going over 5.5A...Beside there are no space for 7 7135....

what's the max current I can get with multi-mode?

 

[bxstylez]

I don't suggest going over 5.5A...Beside there are no space for 7 7135....

can you fit 6x 7135 ?

 

[tobrien]

vin makes good stuff yall

 

[Skylumen]

I can actually do 6.04 with just 6 7135 380mah chip. But 6*350 chip is great .