Want incan m*g ideas advice thanks

[zs&tas]

hi guys, ive gone from stock mags to led upgrades but i miss having an incan. i have two options use my 6D or my 2D ? something like an 85 ?not sure on a batt combination to get the right voltages though ? any ideas for a bright setup ? thanks
any bulbs that will run on two 18650's in the 2D ?

 

[elugelab]

How bout WA 01111?

>>>>>Popular for 7.2v (6AA nimh) - 7.4v (2 x Li-Ion cells) operation<<<<<
Bi-Pin WA 01111: 6.0v 3.35a @ spec (465 b-lumens) / 7.2v (880 b-lumens)

Can be bought here:
http://www.cpfmarketplace.com/mp/showthread.php?t=181713

 

[zs&tas]

hi, thanks i have ally reflector + glass ready, i just need the socket than ill try this, so on two 18650 ill get ~ 800 lums ? not bad
is the bulb liable to on fresh cells ? im still reading up on incan stuff

 

[elugelab]

I'm new to incans also.
Just ordered a 3d mag for a led upgrade, but I think I'll go for an incan instead.

You can get a socket kit here:
http://www.candlepowerforums.com/vb/showthread.php?t=171607

 

[Seiko]

hi, thanks i have ally reflector + glass ready, i just need the socket than ill try this, so on two 18650 ill get ~ 800 lums ? not bad
is the bulb liable to on fresh cells ? im still reading up on incan stuff

2x18650 you'll be fine with a 1111, or even 5761 on fresh batteries from the charger (8.4v) they will sag rather quickly down to 7.2 or 7.4V under the 3.6A draw of the bulb.

When you step up to the multi AA and the 3x rechargeable lith ion voltage is when things get interesting and start getting

 

[Outdoors Fanatic]

hi guys, ive gone from stock mags to led upgrades but i miss having an incan. i have two options use my 6D or my 2D ? something like an 85 ?not sure on a batt combination to get the right voltages though ? any ideas for a bright setup ? thanks
any bulbs that will run on two 18650's in the 2D ?

Everything is here -->> http://www.candlepowerforums.com/vb/showthread.php?t=228965

Have fun!