• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired WITHDRAWN Fivemega Bi-Focal M*g camless 8.5mm

cernobila

Flashlight Enthusiast
Joined
Nov 27, 2004
Messages
1,752
Location
Adelaide, Australia
I have two above reflectors for sale.
These are for regular C and D M*g heads.
They have been enlarged to fit Philips 5761 and Fivemega FM 1909 G4 bi-pin bulbs. (10mm)
One has slight damage around the hole but this does not affect the beam quality at all.
They are threaded for cams if you have them.
US$45 for the two of them plus postage.
Did not realise that two of these were selling for $50 in 2012, the year these stopped being available.

P3240001.jpgP3240002.jpgP3240004.jpgView attachment 13376
 
Last edited:
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

PM sent on Solarforce LT-1 "lantern" attachment
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

I'll take the LT-1 lantern if thermal guy doesn't. :)

ETA: depending on postage - I didn't notice Australia, sorry!
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

All you're if you want it.
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

Yes in Australia. The lowest postage for any above combination, or all items is US$19.
There is not much I can do about that......
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

100% understand and appreciate the information and grace for my haste; I will have to withdraw for the time being.

Thank you and good luck with your sale!
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

I will take the LT-1 lantern as back up if "thermal guy" and "Grijon" do not want it.
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

LT-1 lantern is sold to nfsunder, thank you for your purchase and all the best.
 
Re: WTS: Fivemega Bi-Focal M*g camless 8.5mm/10mm reflector/s

Just to add;

I have been using this reflector with 3x26650 cells, FM 1909 bulb and AW soft start switch in my D M*g and this combo worked perfectly.

I have also used this reflector with 2x21700 cells, Philips 5761 bulb and AW soft start switch in my C M*g and again, this worked perfectly.

And of course, these can be used in any other C or D M*G lights with or without the cam and with original switch and suitable bulbs.
 
Last edited:
Top