Does anyone else have this light or any of the others from Wolf-Eyes? Do you notice that the head does not screw all the way down? If I take out the LED bulb and reflector altogether, it can screw down all the way. Why is this? Is mine defective, or are all of them like this? I am using the Q2 HO CREE btw. Is this not good then for dunking in water, rain or puddles? The head just barely covers the O-ring.
Wolf Eyes 6MX HO CREE EDITION LED
- Thread starter Grun
- Start date
Help Support Candle Power Flashlight Forum
JohnB
Newly Enlightened
Grun,
I have a 6maf here with the Explorer body and it is the same as you describe. When you remove the lamp the cap closes all the way. When you put the lamp in it does not close all the way. I am assuming that this is the design.
I have a 6maf here with the Explorer body and it is the same as you describe. When you remove the lamp the cap closes all the way. When you put the lamp in it does not close all the way. I am assuming that this is the design.
Hey, you don't think it is a design flaw do you? Maybe it will leak in heavy rains? That wouldn't be good huh? Cause I may have to use it in heavy rains.
JohnB
Newly Enlightened
I will pass your comments on and see what they say maybe there is a good reason. I will let you know .
Regards
Regards
JohnB
Newly Enlightened
Grun.
I sent you a PM
I sent you a PM
JohnB, I didn't get your PM. Are you sure you sent it to me?
Just so you know, the Wolf Eyes is kinda my dream light. I found a fix, so I wouldn't worry about it. The 9D Raider is sweet. Get that one. I wouldn't stall. The sooner you order, the sooner you will be bashing assailants in the skull with it.
If I were to get a second light, it would be the Wolf Eyes Raider, or the one with a triple head from dealextreme. Yeah, that would be great. Bright. Yeppers.!
Mike@PTS
Enlightened
The LED module just barley fits and as long as the body covers the o-ring it should be just as water tight as the other Wolf Eyes products. Make sure you keep the o-rings well lubricated for maximum water resistance.
With all that said Wolf Eyes is changing their design slightly and will send us some replacement bezels for those of you that have a 6M Cree model. Please PM me with your order numbers and we'll send you a new bezel.
tomcat017
The D26 LED modules work just fine without any gap and the 9D head seems better than the 6M
JohnB
Newly Enlightened
Grun,
I am sure Mike will take care of this for you.
Sorry you did not get the PM I resent it.
Thanks
I am sure Mike will take care of this for you.
Sorry you did not get the PM I resent it.
Thanks
I have one of these. It appears to me that the o-ring seals just fine.
That said, by offering a replacement bezel Wolf Eyes and PTS are to be commended for addressing this so quickly. I will definitely consider another purchase of one of these amazing products carried at PTS.
That said, by offering a replacement bezel Wolf Eyes and PTS are to be commended for addressing this so quickly. I will definitely consider another purchase of one of these amazing products carried at PTS.
Last edited:
Just so you all know, Wolf Eyes is a great light, and this is in no way to bash the company or to compromise its quality. For the record, all it took was one additional O-ring which I got for free from my Fenix lights. I popped that in as well, in a very good location and I am now confident of its water tightness. If water breaches the loosely placed O-ring (not completely covered), the second O-ring (that I added), being deeper inside will do the trick. Probably better sealing this way. :twothumbs
So go buy yourself a Wolf Eyes light now everyone.:twothumbs:twothumbs:twothumbs
So go buy yourself a Wolf Eyes light now everyone.:twothumbs:twothumbs:twothumbs
Last edited:
LEDAdd1ct
Flashlight Enthusiast
I have a Guider on the way, and can't wait!
