May 1, 2011 #1 M mag1kate8all Newly Enlightened Joined Apr 10, 2011 Messages 24 Location New Jersey Does anyone know what kind of output I can expect if I drive an xm-l at 1.4a ?
May 1, 2011 #2 Sway Flashlight Enthusiast Joined Aug 25, 2003 Messages 1,721 Location North Carolina Try this this page, it gives output levels for the XM-L by the bin and mA. Later Kelly
May 2, 2011 #3 B BlackAndChrome Newly Enlightened Joined Jun 29, 2010 Messages 19 Cree data sheets are a good source too. http://www.cree.com/products/pdf/XLampXM-L.pdf On page 5 it shows that 1.4A puts out about 180% of the 700mA rating. Therefore for a T6 rated at 280lm (700mA) the output at 1.4 would be 280X1.8=504lm Or without math... http://i.min.us/ikNv3A.png -B&C
Cree data sheets are a good source too. http://www.cree.com/products/pdf/XLampXM-L.pdf On page 5 it shows that 1.4A puts out about 180% of the 700mA rating. Therefore for a T6 rated at 280lm (700mA) the output at 1.4 would be 280X1.8=504lm Or without math... http://i.min.us/ikNv3A.png -B&C
May 2, 2011 #4 dfwcaver Newly Enlightened Joined Mar 12, 2011 Messages 11 All of the Cree info can be found here.
May 2, 2011 #5 B BlackAndChrome Newly Enlightened Joined Jun 29, 2010 Messages 19 Damn that sure is handy. Thanks! -B&C
May 2, 2011 #6 M mag1kate8all Newly Enlightened Joined Apr 10, 2011 Messages 24 Location New Jersey i havnt been home for a few days but thank you for all the info