richard8922
Newly Enlightened
- Joined
- Dec 28, 2009
- Messages
- 3
I have just bought a XM-l T6 emmiter to upgrade my 4D mag from a single P7. i am running 4 NIMH D batteries and a 2.8amp driver. would i get away with just running a resistor along with my driver to bring my voltage down to safely run this diode. I understand this emitter needs around 3.5 volts. Does anyone know roughly what ohm resistor i would need.
Cheers in advance for any help
Cheers in advance for any help