• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired MillerMods custom L1P, L2P, and 3-stage L0P.

MillerMods

Flashlight Enthusiast
Joined
Mar 25, 2005
Messages
1,190
Location
Columbus, Ohio
chevrofreak,"Here we have the graph for the L1P, it's not too bad, a nice increase in output and 1 hour on Ni-MH. I could live with that."

Fenix_L1P_-_V2.5_vs_MillerMods.png



Now here we have the MillerMods L2P running on brand spanking new 2020 expiration date Energizer E2 lithium cells.

Fenix%20L2P%20-%20Stock%20vs%20MillerMods%20-%20Energizer%20E2%20lithium.png


Fenix%20L2P%20-%20Stock%20vs%20MillerMods%20-%20Sanyo%20HR-3U.png



Heres a composite of the L2P


L0P running on medium with a Sanyo HR-4U 900mAh Ni-MH. Interesting note, it starts rapidly strobing at the very end which should prove useful to remind you to change the battery :p


MillerMods%20Fenix%20L0P%20-%20low.png



Interesting note, it starts rapidly strobing at the end, but medium and high can still be used with a fairly high output level.


Composite of 3 modes and 2 batteries.

MillerMods%20Fenix%20L0P.png


Same grahs as above, but with the stock L0P tossed in.

Fenix%20L0P%20Millermods%203%20stage%20vs%20Stock.png
[/QUOTE]
 

MillerMods

Flashlight Enthusiast
Joined
Mar 25, 2005
Messages
1,190
Location
Columbus, Ohio
I want to mention that the L2P graph with the 40 minute runtime should have been taken out of the graph. The first run was with one of my circuits that I managed to forget to place the insulator for the inductor in the LE and it shorted out the cells. :( I can assure everyone that this was an unusual rare occurance, if fact of the mods. I've sold, this was the first time this had ever happened.
 
Top