AlexGT
Flashlight Enthusiast
Hi all!
I just finished a mod of my clickie tailcap of the Fenix L2P and am very pleased with the results, I got a 3 way switch from a River Rock 0.5W headlamp, It has Off-low-high-off sequence, and it is basically the same size as the Fenix switch only a bit taller, I managed to put it into the Fenix.
The result is a clickie that has Off-Low-High-off, very nice! It has a 7ohm resistor for low and direct for high, very easy to do, I wonder why Fenix does not do this as standar feature.
Here is a small video clip hope the links work. Click on the image to see the video. This video shows the stock R bin Luxeon, read post #15 and #17 for the SXOH luxeon
Another small video clip of the mod, the light on the left is a Photon led. This video shows the stock R bin Luxeon, read post #15 and #17 for the SXOH luxeon
To fit you will need to sand down the retaining ring of the switch (The one you unscrew to remove the switch) by 1-2 mm or about half the size, or you could use a ring retainer instead, I put some electrical tape around the switch and it friction fits.
Easy mod in case someone else wants to try it.
AlexGT
Edit! The SXOH luxeon swap is on post #15 and #17
I just finished a mod of my clickie tailcap of the Fenix L2P and am very pleased with the results, I got a 3 way switch from a River Rock 0.5W headlamp, It has Off-low-high-off sequence, and it is basically the same size as the Fenix switch only a bit taller, I managed to put it into the Fenix.
The result is a clickie that has Off-Low-High-off, very nice! It has a 7ohm resistor for low and direct for high, very easy to do, I wonder why Fenix does not do this as standar feature.
Here is a small video clip hope the links work. Click on the image to see the video. This video shows the stock R bin Luxeon, read post #15 and #17 for the SXOH luxeon
Another small video clip of the mod, the light on the left is a Photon led. This video shows the stock R bin Luxeon, read post #15 and #17 for the SXOH luxeon
To fit you will need to sand down the retaining ring of the switch (The one you unscrew to remove the switch) by 1-2 mm or about half the size, or you could use a ring retainer instead, I put some electrical tape around the switch and it friction fits.
Easy mod in case someone else wants to try it.
AlexGT
Edit! The SXOH luxeon swap is on post #15 and #17
Last edited: