Sold/Expired Custom Nitrous McLuxIII-PD with a TY0J Lux III ***SOLD***

This is a Custom Ha-Nat McLuxIII-PD with a TY0J Lux III
New Style Ti clip
Ti Bezel Ring
Trit Vial in the piston
Ti screws on the Ti Clip.

Custom converter NGx2
Current levels 150/ 950

This light runs on both R123`s and CR123`s
But the low wont work with Rechargeables before the Voltage has dropped some.
So it is ment to be used with CR123`s.
No harm in using the R123`s though.

Price, $25 less than what I paid ($350 for you math deprived), $325, I paid the premium b/c of the Nitrous levels in the board. It looks like every other Ha-Nat with the slight mis-matched head. I'll eat the PP fees and the shipping fees, PP only, cash or CC.

USA only USPS priority w/ DC. Not responsible for lost or stolen goods. People can vouch that I am on the up and up on these here boards!
This light is Mint and is So buttery smooth, i just dont need it. I wont touch it again now that I have a Ti PD on the way.... :lolsign:

I want to get this clear to clear any potential problems, the first "I'll take it PSM!" gets it, you all know what this light is and what it looks like. It is super white to my eyes, very nice tint......

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

Cool light PSM, should move quickly. Real good price for a nitrous version.

Cliff

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

Cliffnopus said:

Cool light PSM, should move quickly. Real good price for a nitrous version.

Cliff

Click to expand...

Thanks Cliff, I hope so. I am going to the post office in the morning to pick up a package, so the buyer could have it as early as Mon. or Tues depending on their location.

The low on this light is perfect for walking at night, long runtime. When you hear a noise, ease into the smooth piston to light up the night!

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

Hi, I'm a PD newbie. Can you please explain how this nitrous PD is different ?

Thanks...

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

The drive levels are set higher 3x higher for low and almost 2x for high. Low is perfect IMHO, it is for 99% of all tasks. High is there when you need it. I personally think it saves battery life, b/c you will high less often. You will be drawing 150mA instead of 530mA, which is high on stock PD's *I think*. This means that you will be using low for the task at hand, where on a stock PD you would be using high bc low on a stock Pd would be insufficient light. I hope that makes sense...

PICS:




Now is that a purty light or what?

Off to run to Target with the fiancee, back in a bit!

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

Just a tad of more "go juice" is all----950ma at the top end! The term is a loose reference to nitrous oxide which is a gas injected into automobile (typically racing or drag racing vehicles) engines for a considerable increase in power. Zooooooom!!!



Karl

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

Sorry PSM, stepped on yer toes.....


Karl

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

PM Sent.

Mac

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

bombelman said:

Hi, I'm a PD newbie. Can you please explain how this nitrous PD is different ?

Thanks...

Click to expand...

Bombelman, this is a really sweet light that does not come available very often. Good price, too. Better jump quick if you are interested...

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

I'll take it

Mac

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

EricMack said:

Bombelman, this is a really sweet light that does not come available very often. Good price, too. Better jump quick if you are interested...

Click to expand...

Too bad that amount does not come available to me either....

Free Bump

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

cmacclel said:

I'll take it

Mac

Click to expand...

Good Pull, Mac!! :thumbsup:

Re: Custom Nitrous McLuxIII-PD with a TY0J Lux III

cmacclel said:

I'll take it

Mac

Click to expand...

HeHe, for once YOU are gonna send ME PP, its usually the other way around! :devil:

PM incoming....

cmacclel said:

Click to expand...

Received! Will ship out in the morning! :goodjob: