• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired (CLOSED) Fivemega's 12xGP2000 TO 3D M*g HA type III

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,532
Location
California
[size=+4]
CLOSED​
[/size]

12GP2000002.jpg

12GP2000003.jpg

43A.jpg

1DMg010.jpg



Hi folks,
here are some new toys for you.
I shortened 4D M*g to size of just a bit longer than 3D SIZE, bored out in 3 slots inside to accomodate 12GP2000 cells in special low resistance battery holder with built in charging jack, special stylish cross grooved body knurling for best grip and grooved (finned) head for best heat dissipation.
All 12 cells are connected in series for total voltage of 14.4 volt output.

You can use any capacity of uniform high rate 4/5A cells.
I highly recommend use 3 battery sticks of 4xGP2000 end to end soldered, without heat shrink cover by www.cheapbatterypacks.com when available.
End to end soldered batteries will have much more capable of high current (due to low resistance) also easy to install. No need any heat shrink cover over the pack and you must mention this when ordering from Cheapbatterypacks.
You can also use 2 of above sticks, one of 3 sticks with a dummy for 11 cell operation.
No need to remove batteries or tail cap for recharging. Simply plug in provided male jack and recharge it with your smart NiMH battery charger.
There are many bulb options such as Osram 62138 (11 cells), 64610 (11 cells), 64625 (11 cells), 64623 (12 cells) and ....

Comes in gun metal grey HA type III only.
Anodizing has been applied after all machine works.
All flashlights come with one battery holder and no other special item is included.
DO NOT overtighten or force battery holder.
No extra battery holder available and I will have to refund for returned damage flashlight/holder.
Price $155 each flashlight with one battery holder.
Dual function reflector $25 each
4/5A dummy $8
Boro lens $5.50
Shipping:
$10 to States for 1 or 2 units
$20 internationaly for each unit
It is [size=+1]Necessary[/size] to choose your own available number and option, post here and detail in paypal note with your CPF handle.
Paypal: DO NOT PAY
Please PM me for other type of payment.
All shipping will start 3 days after payment received and cleared in full.
-------------------------
#1 Grey HA therisensun paid shipped
#2 Grey HA vandrecken paid shipped
#3 Grey HA rdh226 paid shipped
#4 Grey HA sancho886 paid shipped
#5 Grey HA Bob_G paid shipped
#6 Grey HA k-2 paid shipped
#7 Grey HA maxhawk paid shipped
#8 Grey HA Mad Maxabeam paid shipped
#9 Grey HA Josey paid shipped
#10 Grey HA senorcosas paid shipped
#11 Grey HA Mad Maxabeam paid shipped
#12 Grey HA jefft paid shipped
-------------------------
Any comment welcome
 
Last edited:

therisensun

Newly Enlightened
Joined
Sep 16, 2005
Messages
77
Location
Waterford, MI
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

Fivemega,

:paypal:

#1 Grey HA $155
5 x 4/5A dummy $40
Shipping $10

Total $205

Thanks,

Max
 

vandrecken

Newly Enlightened
Joined
Oct 8, 2005
Messages
114
Location
Cheshire, UK
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

PM sent about using these with 2/3A cells. If this holder would take 18 x 2/3A cells instead please put me down for number 2. Host plus battery holder plus international shipping only and I'll get paypal on the way.

Thanks, Vandrecken
 

rdh226

Enlightened
Joined
May 2, 2006
Messages
315
Location
Nashua, NH, USA
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

Oh damn! another flashlight...

$155 one grey HA
$025 one HS reflector
$025 one MOP reflector
$048 six 4/5A dummy cells
$010 shipping
$247 total

PayPal sent (Friday, 18-August).

-RDH
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,532
Location
California
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

vandrecken said:
PM sent about using these with 2/3A cells. If this holder would take 18 x 2/3A cells instead please put me down for number 2.

Thanks, Vandrecken
As you see in picture, length of 6xIntellect 1200 is same as 4xGP2000
So it is possible to use 16, 17 or even 18 cells of 2/3A with proper dummies in same flashlight and battery holder.

12GP2000005.jpg
 

Bob_G

Enlightened
Joined
Apr 25, 2005
Messages
682
Location
Kentucky, USA
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

:paypal: for:

#5 Grey HA
1x 4/5A dummy

FM, please see my note in paypal email.

Thanks :)
 

k-2

Newly Enlightened
Joined
Oct 25, 2005
Messages
41
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

PayPal incoming for #6 Grey HA.
k-2
 

k-2

Newly Enlightened
Joined
Oct 25, 2005
Messages
41
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

FM,

paypal.gif
for:
#6 Grey HA @$155.
(1) 4/5 Dummy @$8.
(1) MOP Dual Function Reflector @$25.
Shipping @$10.
Total $198.

thanks.gif

k-2
 

Mad Maxabeam

Newly Enlightened
Joined
Nov 26, 2005
Messages
96
Location
Massachusetts
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

:paypal:
#8 Grey HA @$155.
(1) 4/5 Dummy @$8.
(1) MOP Dual Function Reflector @$25.
Shipping @$10.
Total $198.
 

vandrecken

Newly Enlightened
Joined
Oct 8, 2005
Messages
114
Location
Cheshire, UK
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

# 2 grey HA

$155 for flashlight with one battery holder.
$25 Dual function reflector - if there's a choice, I prefer a MOP finish or alternatively a LOP.
$20 international shipping
TOTAL $200

Paypal sent - thanks

Vandrecken
 
Last edited:

Josey

Flashlight Enthusiast
Joined
Jan 5, 2004
Messages
1,015
Location
NW Rainforest
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

Beautiful, FiveMega. I'm really sorry I missed this. Those GP2000s are great batteries. --Josey
 

senorcosas

Newly Enlightened
Joined
Apr 6, 2006
Messages
166
Location
San Antonio, TX
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

Paypal sent for:

12xGP2000 TO 3D M*g HA type III
Two 4/5A dummy cell

Thanks,
Russell
 

vandrecken

Newly Enlightened
Joined
Oct 8, 2005
Messages
114
Location
Cheshire, UK
Re: Fivemega's 12xGP2000 TO 3D M*g HA type III

Arrived safe and sound in UK. Superbly packed, this turns out to be an awesome piece of work. The light loaded up fine with 18 x 2/3A cells - fiddly with loose cells :) but the fit in the holder and then into the body is spot on. The machining is simply immaculate and blue-grey color of the anodize looks great.

This promises to be an outstanding light - I just hope I don't mess up fitting the Kiu lampholder and regulator in there.

Oh, and by the way, that knurling is AGGRESSIVE no way you'll drop this by accident.

Thanks Fivemega,

Vandrecken
 
Last edited:
Top