Sold/Expired CLOSED: SF U2 etc (Z58/Z59) Custom Tailguard

CLOSED

For Sale: SF Z58/Z59 (U2 etc) Custom Tailguard

There were requests for a tailguard to fit the Surefire U2 in this thread, so a few were made.


- CNC machined A6061
- HA Black Matte finish (Not the purplish black found on the U2)
- About 90pcs total are available

2 Flaws I've Noticed
1 spot of ano is missing where the current path was attached during the HA process.
About half of them turned out this way. Here is a pic of one of the ugliest examples.


The length could have been a tad bit shorter.


Price
"A" Grade (Contact point is barely noticeable. SOLD OUT): $US18 each

"Blem" (Contact point is apparent. 45pcs available): $US16 each.
Will start shipping from the cleaner parts.

(See post #109)

Paypal only (any kind) please.

Shipping and Handling
Fees include the cost of a padded envelope, PP fees etc.

Ordinary Airmail
$US2.30 Flat rate to anywhere in the world. I will not be responsible for lost or damaged items.

EMS
Insured, trackable, faster to available countries. Recommended for orders over 5 pcs.
Asia: $US9
Other: $US12

Ordering
Please send me a PM indicating...

In the Subject
Your CPF name and Z58
In the Message
- CPF username (once again)
- # of pieces, "A" grade or 'blem'
- Real Name
- Shipping Address
- Email address

I will reply with availability and payment instructions as soon as I have your
package ready to ship.
Please post in this thread (details are not needed) if you want to make sure your request got through.

Expect 7-14 days for delivery and let me know if you do not receive your order within 2 weeks of shipping.

Thank you for looking :wave:

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

-FAQ-

Which Light Can This Tailguard Be Used With?
The tailguards are a replacement for the stock retaining ring in the Z58(HA Nat)/59(HA Black) clicky tailcap.

I am not totaly familiar with the vast lineup of Surefire lights and accesories, and will just say that
they can be used on the switch which comes with the Digital Lumamax U2.
If any of you can confirm other compatible tailcaps, I will update info.

What Does It Do
The TG is a replacement for the stock retaining ring, and will extend the ridges of the tailcap
to protect the rubber boot.

It will enable 'candle mode', prevent the switch from accidental activiation, and protect the switch
innards from tail-end drops on hard surfaces (to some extent).
Crenelations were added for easier access, but activating the switch will become more difficult
than the stock condition.

Fellow CPFer Leef is working on another solution incorporating the McClicky switch here.
INTEREST THREAD: LeefClicky-C tailcaps

Will My Light Still Be Waterproof?
'Waterproofness' *should* be the same as stock parts as long as you fit the washer (which comes
with the stock part) correctly.
Please remember that you will void any gurantees from Surefire by dissasembling the switch
or using third party parts.
This tailguard is a custom part being offered by an amateur hobbyist. Please use at your own risk!!

How Do You Install It?
- Heat the switch to loosen the thread locker on the retaining ring by using either of the following methods.
Seal in a small Ziploc bag and boil in hot water for a few minutes, or use a heatgun.
Avoid aiming directly at the rubber boot.

- Grip in a beltwrench or vise, fit a pair of needle nose/snap ring pliers in the small holes to twist
the retaining ring CCW.
Be careful and use slow/steady pressure to turn. The tool can slip easily and scratch the HA finish.

Another useful tool would be an adjustable watch wrench. You can find them on eBay.
Search watch wrench.


Remove the thin washer from the stock part and fit it onto the tailcap.
Reassemblw the switch and screw the TG on tightly.

I Scattered The Switch Parts. In What Order Do I Put Them Back Together?
See Pic Above

I'm Afraid The TG Will Become Loose. How Can I Secure It?
Use a drop of super glue or Loctite on the threads.
Shrink tube is another option if you do not mind aesthetics.

Are There Plans To Do A Run In HA Natural?
No, sorry.

Please post questions in the thread, it would be better if everone can share the info.

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

paypal...er...I mean email sent for one blem tailguard! :goodjob:

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

email sent

Olaf

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Emails sent, thank you :thumbsup:

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Email sent as well!
:thanks:

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

E-Mail for A-Grade inbound ... :thumbsup:
bernie

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Nice tailguard nekomane...

I looks like the 'racking marks' will be hidden when the switch boot is installed.

My switch fell into pieces also, upon disassembly...I thought it was a defect, must be normal for this switch.

TB

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Email sent for 2x"A" grade tailguards!

Thanks Neko.

MSax

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Hi nekomane san,
E-mail sent for 1 "A" grade. :goodjob:

christrose

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Mail sent for 1 grade A.

:thanks:

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Very Nice Nekomane :thumbsup:

And BTW...I wish you a Happy NEw YEar :wave:

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Nekomane,
E:bow: mail sent, can't wait.
Thanks!

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Nekomane,

Email sent for two A grade Z58 Tailguards, and more Z57 Tailguards as well. Superb, as usual!

9x23




Thanks!

9x23

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

I'd like two "A"s!! E-mail to you.


Karl

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

I would like to Reserve 1 Z58 "A" Grade Tailguard Please.
Will Paypal you later tonight.




Thank you,
Benny

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

DELETED

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Email sent for 1 grade A, and 2 z57 tailguards

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Hi :laughing:

Email sent for two A grade Z58 Tailguards, and 2 Z57 Tailguards

Re: FS: SF Z58/Z59 (U2 etc) Custom Tailguard

Email sent for two A grade Z58 tailguards.