After removing and cleaning back up, and installing the Seoul P4 U-Bin, this is how the L1T pill looked.
Installed
Civictor Left, L1T/SSC on low to the right:
Civictor Left, L1T/SSC on low to the right (underexposed 2 stops):
Civictor Left, L1T/SSC on high to the right:
Civictor Left, L1T/SSC on high to the right (underexposed 2 stops):
If I want a tighter focus, I'm going to have to take some material off of the back of the reflector... but certainly not as much as a Cree would require. It's almost good enough as it is.
For those of you who don't know about these flashlights, the Civictor runs with the same top end setup as the stock L1T, and it only has one brightness level. It may have a lower bin emitter, but close enough.
Installed
Civictor Left, L1T/SSC on low to the right:
Civictor Left, L1T/SSC on low to the right (underexposed 2 stops):
Civictor Left, L1T/SSC on high to the right:
Civictor Left, L1T/SSC on high to the right (underexposed 2 stops):
If I want a tighter focus, I'm going to have to take some material off of the back of the reflector... but certainly not as much as a Cree would require. It's almost good enough as it is.
For those of you who don't know about these flashlights, the Civictor runs with the same top end setup as the stock L1T, and it only has one brightness level. It may have a lower bin emitter, but close enough.
Last edited: