SRacer2000
Newly Enlightened
- Joined
- Feb 20, 2006
- Messages
- 143
I need to get a McR19XR turned down from the stock 20mm depth to a 18.75mm depth. Can someone here do this for me?
I need a turned down McR-19XR
- Thread starter SRacer2000
- Start date
Help Support Candle Power Flashlight Forum
jch79
**Do Not Feed The Vegan**,
I hope you can find someone to do this... but if you can't, there's always a file (or a Dremel if you're confident enough). I've brought down reflectors with both. :shrug: All you need is a steady hand, and a little bit of patience. 
john
john
SRacer2000
Newly Enlightened
- Joined
- Feb 20, 2006
- Messages
- 143
I tried to do it with my drill press but it's crooked.
greenLED
Flashaholic
Sandpaper is your friend. Start with a course grit and start changing to finer grits as you get closer to your target length. Rotate the reflector as you go, and work on a level surface.
TranquillityBase
Flashlight Enthusiast
- Joined
- Jun 12, 2005
- Messages
- 3,741
If it doesn't need to be perfect, I have one you can have for zero $$$...It's 18.72mm, and the reflective surface has a very slight haze.
J!m
Newly Enlightened
Send me a PM with photos preferably.
I can do it for you...:wave:
I can do it for you...:wave:
SRacer2000
Newly Enlightened
- Joined
- Feb 20, 2006
- Messages
- 143
IT'S DONE! I finished my TIR to Reflector convert. I sanded a shaved down McR-19 XR reflector and put a UCL lens. And now that your interested. 100x Thanks to TranquillityBase for providing the the McR-19 XR.
Pics to come... :nana:
Pics to come... :nana:
