First look at Jet-1 Pro EX

Here is a first look at the new EX from JETBeam.

The flashlight is a 2xAA flashlight with multiple (3) adjustable levels. It will always start at level A and at the brigthness defined for that level.
The switch is a revers clickie, making it easy to change levels when the light is on. The light can not tailstand.

The size is between Olight T25 and Fenix L2D and the light output looks to be in the same range as those two lights.


The factory standard is 170 lumen and 20 lumen, but I reprogrammed it for:
2 lumen (min) specified runtime 50 hours, measured current draw 40 mA
200 lumen (max) specified runtime 1 hour, measured current draw 2.1 A
(All lumen values are JETBeam specifications).

I also checked for pwm in the light output, but did not find any.


It comes in this paper box:



















Included accessories:



Jetbeam has two different clips, but the two way clip is not really useful for this light:
Standard clip:


Two way clip:



Compared to other Jetbeam lights:






And compared to other AA lights:

The two way clip looks like an invitation for it to fall out of your pocket, which explains why they went with the standard clip on that one. The length of the body tube makes the standard clip much more stable.

Thanks for the current measurements & side by side shots.

Regards,
Eric

Looks nice thanks for pics that was an amazing comparison shot :twothumbs

Who sells it , and what's the price?

Thanks HKJ.
It looks a bit like the Ultrafire WF-606a.
2 lumens for 50 hours sounds like a bit low, I'd like it to be longer.

flange938 said:

Who sells it , and what's the price?

Click to expand...

Bugout Gear in US - look for "specials" "CPF" page
http://www.bugoutgearusa.com/

Southern-Lights in Australia - 5% off on orders > $50, code: CPF2008
http://www.southern-lights.com.au/

I've just posted some beamshots in https://www.candlepowerforums.com/threads/200511
As you might expect it's output is different to the nonIBS model.

AMAZING photos. Thank You for taking the time to share this with us.