seoul in P3D ?

big beam · Feb 25, 2009

Has anyone ever done one of these swaps?Fred has some nice warm seouls and I have a head that not glued:twothumbs soooo....as you can see I'm thinking why not.
DON

Marduke · Feb 25, 2009

You could also swap in a nice warm Cree. Might be an easier mod.

krazy89 · Feb 25, 2009

hey bud... if your P3D was a Cree... then the reflector will NOT be ideal for a SSC.... u might have to play with the depth of the led in relation of the reflector to get a decent beam profile outta it...

KraZy

Nake · Feb 25, 2009

A reflector from a P1D Luxeon will work in the P3D head. A reflector from a Fenix Rebel will also work. It appears to be the same as the P1D Lux, but with an OP finish.

Gunner12 · Feb 25, 2009

It should work as along as the LED is at the focal point of the reflector.

Nake · Feb 25, 2009

Gunner12 said:
It should work as along as the LED is at the focal point of the reflector.

If you're talking about the Cree reflector, it works but there is no hotspot. It is total flood. Light output is down considerably also. That is with the Seoul all the way up into the reflector.

big beam · Feb 25, 2009

Thanks all.not what I wanted to hear.Where can I get some warm cree's with a low vf say 3-3.25? WJ tint would be nice.
DON

seoul in P3D ?

big beam

Enlightened

Marduke

Flashaholic

krazy89

Enlightened

Nake

Flashlight Enthusiast

Gunner12

Flashaholic

Nake

Flashlight Enthusiast

big beam

Enlightened

Similar threads

Latest posts