Do AW 18650's fit without issue in the Zebralight C60?
- Thread starter Doug
- Start date
Help Support Candle Power Flashlight Forum
TooManyGizmos
Flashlight Enthusiast
~
I think you mean SC60 Zebralight.
It does .. IF .. it has a anode that is protruding .
Just be sure it's not labeled as a " Flat-top " .
AW sells em both ways - but you have to read the fine print .
And YES ... some flat-tops can have connection issues in the SC60 .
~
I think you mean SC60 Zebralight.
It does .. IF .. it has a anode that is protruding .
Just be sure it's not labeled as a " Flat-top " .
AW sells em both ways - but you have to read the fine print .
And YES ... some flat-tops can have connection issues in the SC60 .
~
Last edited:
mrlysle
Enlightened
I'm using AW 2900 mah flat tops in my SC60w and have had 0 issues. YMMV
tre
Flashlight Enthusiast
I use IMR cells, AW 2200 cells, and Redilast 2900 semi-flat top cells and all work fine.
My SC60w
- AW 2600 didn't make reliable contact. Sometime it would work sometimes not. Poor positive contact and Tail spring would catch and pop on those three nubs on the neg contact.
-AW 2200 button top: works great!
- Redilast 2900: Would not fit in tube. It might work if I remove wrapper but it is noticeably longer than other cells and I don't want to over compress the tail spring so I have not tried.
- AW 2600 didn't make reliable contact. Sometime it would work sometimes not. Poor positive contact and Tail spring would catch and pop on those three nubs on the neg contact.
-AW 2200 button top: works great!
- Redilast 2900: Would not fit in tube. It might work if I remove wrapper but it is noticeably longer than other cells and I don't want to over compress the tail spring so I have not tried.
Last edited:
