Sold/Expired Surefire L1 SST-90 Bezel. Copper to LED**SOLDSOLDSOLD*

bigchelis · Aug 15, 2011

Hi all,

I am already regreting this as I type:shakehead I want to put up for sale probably the brighters Surefire L1 bezel ever made to date.

Delivered in the U.S. $350**SOLD**SOLD***.

Here is what you get:

SST-90, highest 65K tint cutter sells
Copper heatsink
LED to copper bonding**NO STAR**
4.8A at tail via IMR 18650
1301 OTF lumens via IMR 18650
Double coated AR lens
Flat polished bezel
Aleph 18500 Body
AW 18500 cell
Surefire Type III Tailcap Twistie
E-compatible will all E-series bodies
Comes with 3 Reflectors. Flood, Med, and Throw. But I will leave the flood on since it gives nicest beam.

With the Aleph 18500 cell at 3.8V input it still pulls 3.2A at the tailcap and confirmed while at DarkSucks lab/CNC shoppe yesterday that it does over 900 real OTF lumens at such low current. Darksucks was in awe, but then I told him with IMR 18650 cell it does 4.8a and 1301 OTF lumens. Anyhow, topped off the AW 18500 and it does 4.2~4.3A at the tail which is still well over 1100 OTF and super nice small EDC package. You can still use IMR 18500 for more current and more lumens too. The tailcap is a twistie and will not melt.

build thread here:
http://flashlightnews.net/forum/index.php?topic=2595.0

Best,
Jose

bugsy714 · Aug 15, 2011

Re: WTS----Surefire L1 SST-90 Bezel. Copper to LED bonding and ****1300ish OTF LUMEN

how hot does that get? Nice little pocket cannon!

bigchelis · Aug 15, 2011

Re: WTS----Surefire L1 SST-90 Bezel. Copper to LED bonding and ****1300ish OTF LUMEN

bugsy714 said:
how hot does that get? Nice little pocket cannon!

It gets toasty at 1min if you indoors only. You must keep it in the hand while on thats for sure.

this light get alot of attention cause the size the brute lumens almost too bright its funny. Expenisve build, but the laughs and disbelief attention it gets = priceless

When I used it last on an outdoor hike you can actually let it run till the cell depletes without turning it off due to the hand absorbing the heat. Then it just stays just slightly warm, but during the nite walk it was about 60 degrees which probably helped keep it cool.

PCC · Aug 15, 2011

Re: WTS----Surefire L1 SST-90 Bezel. Copper to LED bonding and ****1300ish OTF LUMEN

I'm going to miss that little hand warmer! That thing was just sick in a

way! I can see breaking that out when the neighbor comes over with his new MagLED, modded or not, and seeing the priceless look of disbelief in their face as you turn that thing on and light up everything with a light the size of a E2L!

bigchelis · Aug 15, 2011

Re: WTS----Surefire L1 SST-90 Bezel. Copper to LED bonding and ****1300ish OTF LUMEN

How about just the bezel by itself for just

$325 Delivered in U.S

bigchelis · Aug 16, 2011

Re: WTS----Surefire L1 SST-90 Bezel. Copper to LED bonding and ****1300ish OTF LUMEN

Here are some build pictures:

Not just copper heatsink, but threaded copper heatsink:

bigchelis · Aug 17, 2011

Re: Surefire L1 SST-90 Bezel. Copper to LED bonding**Complete LEGO NOW*Better Deal*

I thought this would have sold already since copper heatsinks are ubber expensive and this light not only has a copper heatsink, but its threaded and has LED to copper bonding.

To make this a super speedy sale the price is now sweeter as I added something special:

$350 Delivered in the U.S.

Added Aleph black 18500 body.. Yes, its bored.
Surefire Twistie Tailcap old school twistie
AW 18500 new cell with label removed.

Check out the lego now:

dbleznak · Aug 17, 2011

I'm totally interested. I just got a mgizmo ti 2*123 pak. Do you think I could run that bezel with 2* 3.7v RCR123 ?

blackbalsam · Aug 17, 2011

Re: Surefire L1 SST-90 Bezel. Copper to LED bonding**Complete LEGO NOW*Better Deal*

Jose, I'll take it. Thanks...Robert.

bigchelis · Aug 17, 2011