Sold/Expired === FlexMag & Mini FatMag & MicroMag TK ===

=== TurnKey Packages ===
FlexMag-V (120+ lm) - Digitally controlled with 8-level of brightness, 2-115 hours runtime. ($135)
Mini FlexMag-V (120+ lm) - Digitally controlled with 8-level of brightness, 75+ minutes runtime. ($135)
Mini FatMag-V (150+ lm) - Optimized for maximum brightness, 60+ minutes runtime. ($140)
MicroMag (80+ lm) - Cute, small and affordable EDC, 120+ minutes runtime. ($65)
* All units are ready to run, only NiCd|NiMh|Alk|Li batteries are required.
* D-Pill and Mini FlexMag-V requires 14500 Li-Ion batteries.
** Special ** purchase any 3x TK and get a D-Pill free.

=== Modded Parts ===
Mag1D, 152mm body ($40)
MicroMag, 70mm body - see haveblue's sales ($27.50)
Modded Li-Ion Charger & 2x 14500 Li-Ion ($30)
- capable of chargin R123, 10440(AAA), 14500(AA) Li-Ion

=== FlexMag-V Details ===
- nFlex driver
- LuxV VY0T (-$10 for Lux3T TWAK|TW0K|TY0L replacement)
- WH/SL 8AA-2D battery adapter
- Modified Mag reflector & switch assembly
- Mag2D host (Mini FlexMag-V is in Mag1D host)
- Colors available in black, pewter, silver, copper, red, blue, splash blue, purple, and green.

=== Mini FatMag-V Details ===
- Fatman driver
- LuxV VY0T (-$10 for Lux3T TWAK|TW0K|TY0L replacement)
- EL 3AA-1D battery adapter
- Modified Mag reflector & switch assembly
- Cutdown Mag1D host (152mm body)
- Colors available in black, pewter, silver, copper and blue.

=== MicroMag Details ===
- D-Pill (+$15 for MadMax+ WO & LuxIII TX1J replacement)
- NX05 optics
- Cutdown MiniMag host (70mm body)
- Colors available in black, pewter, silver, copper, red and blue.

All TK pricing includes S/H for US, international S/H please add $6
Cash PayPal: modamag_std[at]yahoo.com
Credit Card PayPal (add 4%): modamag_cc[at]yahoo.com
Post in this thread to indicate which item you ordered.

PM sent

mut

PURTY LIGHTS!! /ubbthreads/images/graemlins/grin.gif

Seriously man that is the most affordable MicroMag I have ever seen, complete with kit and all. That's below the cost price of my MicroMagMadMax+! (no longer in production so you'd best get them from modamag, ya hear..)

If you can't quite fork over the dough for a real Surefire, the MicroMag may be the next best thing in the size category.

I have a questions concerning this light.


=== TurnKey Packages ===
FlexMag-V (120+ lm) - Digitally controlled with 8-level of brightness, 2-115 hours runtime. ($135)


It looks like it will run on standard alkalines, but how about 3x123 cells?

TIN, no problem with 3xCR123 or 3xR123.
You just need to find the sleeve at Home Depot or Lowes

OK, thanks. I'll take that light, in pewter.

The Nflex is a great Circuit, and will give you alot of "FLEXability" /ubbthreads/images/graemlins/wink.gif
So it will work off 3x123, but I seriously doubt it would give you any usable runtime.

You would be better off with 4xCR123 with the VYOT LuxV nFlex in a 2D, 3xCR123 only gives you around 1 volt head room to play with give or take. 0.5V for the Vf variation of the LED and the 1.2V for the nFlex driver unless the reverse protection has been removed.


I cant quite remember, but I think 4x123 would fit, maybe with a slight mod to the tail spring.

At any rate, you could end up making 5 or 6 battery combinations that would work with the nflex, just keep in mind the 1.2V headroom.

Ticey,

Good point the nFlex driver needs voltage above the Vf of the LED its driving plus 1.2 volts to stay in regulation if the reverse protection has not been removed 3XCR123's would not give a very long run time in regulation with a T Vf after counting in voltage sage depending on the selected drive level. 4xCR123's with a sleeve and modified tail spring would be a better option and provide a longer run time, 3xR123's will work also just don't over discharge them /ubbthreads/images/graemlins/smile.gif

Later
Kelly

Ahem...PM sent.

OK here we go

MicroMag-Silver
Flexmag- Red
MiniFatMag-Black
TriStarFatMag - Silver

Hope I got it.

thanks again


Andreas

Got my light. Thanks. Now I have to figure out which cell configuration I want to use.

Re: === FlexMag & Mini FatMag & MicroMag TK ===

Count me in for a Pewter 1D and a ready made TWOK LuxIII with heatsink. PP'd yesterday

Re: === FlexMag & Mini FatMag & MicroMag TK ===

Hi Mod,

PP sent for

Mini FatMag-V (150+ lm) - Optimized for maximum brightness, 60+ minutes runtime. ($140), chrome color, please.

Re: === FlexMag & Mini FatMag & MicroMag T

Hello haveblue. We missed you at the get together. I wanted to see those pretty little cut down Mags but ModaMag had me drooling with the ones he brought To bad I didn't win one:-(

dimwatt

Jonathan

I need a D-Pill and optics (i bought one of HaveBlue's micromags back when he ran them)

You have those seperately?

Shane

Shane, I got all the stuff you need.
PM sent for more info.

Good good. I can get them when i settle my *caugh* account *caugh* lol /ubbthreads/images/graemlins/smile.gif

Shane

Re: === FlexMag & Mini FatMag & MicroMag T

[ QUOTE ]
dimwatt said:
Hello haveblue. We missed you at the get together. I wanted to see those pretty little cut down Mags but ModaMag had me drooling with the ones he brought To bad I didn't win one:-(

dimwatt

[/ QUOTE ]

I'm sorry I couldn't make it to the meet. My best buddy for 15 years, Poof the cat, died of natural causes in the late afternoon. It was hectic hiding the cat from my 4 year old son. I didn't want my son to see his best buddy in her condition. By the time the crisis was over it was 6:40pm and too late to make the meet.

Next time? OK?

Re: === FlexMag & Mini FatMag & MicroMag T

PM sent for MiniFatMag