DisrupTer911
Enlightened
GoingGear has a youtube review up on the PD22, LD12 and LD22.
So, it doesn't work correctly.According to Fenix it can take 3.3V max. My batteries are 3.34V and the flashlight works however I have only two modes.
I don't have the PD22, but I do have the LD12/22. For them, no, the threads are more course on the newer lights and they won't thread with the L1D. I'm assuming the PD22 is the same threads as the LD12/22.Is the PD22 head legoable with other Fenix lights such as L1D/L2D?
So, it doesn't work correctly.
I don't have the PD22, but I do have the LD12/22. For them, no, the threads are more course on the newer lights and they won't thread with the L1D. I'm assuming the PD22 is the same threads as the LD12/22.
I did some checking here with the LD10: http://www.candlepowerforums.com/vb...D12-and-LD22&p=3944797&highlight=#post3944797
I was just researching. I have the LD12. I am considering adding the LD22 and/or PD22 to the collection. In comparing the lumen levels of each mode, I'm thinking all 3 have a different head. if they were the same head, I would expect at least medium and high would match up between the PD22 and LD12. I'm just guessing of course.
max, high, medium, low:
LD12: 115, 60, 27, 3
PD22: 190, 95 ,46, 8
LD22: 190, 92, 42, 3
Does anyone know what the strobe frequency is on this thing? All I'm seeing in all promotional materials is "rapid strobe".
Tenergy makes a 3.0 volt rechargeable battery, but the battery requires a special charger. The batteries have a shorter runtime, as they are either 750 mAh or 900 mAh. I just looked at Amazon. A set of four 900 mAh batteries with the charger from Tenergy currently sells for $27.99. Just search Amazon for Tenergy rcr123a 3.0v 900mah.I just bought the Fenix PD22 from REI.
Is there any rechargeable battery that will work with this light?
If not, it will serve as a backup / emergency light.