wquiles
Flashaholic
I just did a search and came up with a voltage of about 6.8-6.9 volts for the MN16 (while the MN20 runs at 7.2-7.3 volts). Since the HDM6 is setup to run the MN21 at 6.8 volts or so, it "should" work fine since the soft start would prevent any spikes from killing the MN16 at startup.cnee said:Since the MN20 is so hard to come by these days, I am using the MN16 instead in my M6 when I don't need to use the HOLA. Would HDM6 work with the MN16?
Andrew, what do you think?
Will