katsyonak
Enlightened
- Joined
- May 9, 2007
- Messages
- 277
Thanks for the fast answer TorchBoy! :twothumbs
You are very welcome.Thanks for the fast answer TorchBoy! :twothumbs
Thanks very much.May all your photons be supercharged! Fantastic thread.
KENNAN IS IN STOCK! Edit: NOT in stock. They just say they are. :thumbsdow
:buddies::grouphug:
(Do I sound a little excited?)
There are new photos there too.
Edit, OK, so I spent a few minutes putting in an order. I would have posted first. Priorities, you understand. :laughing:
I got some of these from KD yesterday: P7 "3 amp" 3-mode driver. $12.01. Buck regulator, 5.5-15.5 V in.
I put one in a 2D Mag and used 6AA eneloop in a mdocod battery holder. Output is almost identical with the simple 8xAMC7135 that KD sell. Output is a bit lower than my Mags driven at 3A when tested in lightbox and throw. So it's a bit lower than 3A on 6 eneloop. I didn't feel any insatiable need to measure mA to led because of the observations in this post.
It has pwm flicker on low so it's about 100 Hz. I notice the pwm on medium but I'm sensitive. No flicker on high.
There's no memory function. It comes on in the next mode next time you turn it on. It also gets warm on 6 AA, on 8AA it gets scorching hot.
It doesn't function with one D LiION, it needs more voltage to work. I don't know how much but with 4.2 Volt=no light.
A one level mod might exist but as the driver relies on switching to a lower output mode for thermal protection (and it gets hot) that might complicate things.
according to the shoppe the blue one runs coolerPS. What's the difference between a Shark and a BLUE Shark?