Der Wichtel
Enlightened
The drivers are available now.
Sry for the waiting but I had to look for a room for my beginning university time
Sry for the waiting but I had to look for a room for my beginning university time
You can become a Supporting Member.
Hi,
you are right.
Just connect it like this
http://daoriginal.da.funpic.de/data/Dcon/diagram.jpg
your D2Dimm wiring should also work. However this should be better:
But I'm not 100% sure.
If the D2Dimm has no resistance between positive in and positive out then this should work better than your wiring.
Hi Der Wichtel, I have some drivers yet;
http://www.dealextreme.com/details.dx/sku.10421
http://www.kaidomain.com/ProductDetails.aspx?ProductId=1638
http://www.kaidomain.com/ProductDetails.aspx?ProductId=1678
Can I use any of them with your buck for 3x P7 with this wiring or I have to use your driver? I am just waiting for the funds to buy it and the Leds also...:devil:
I don't really understand what you mean but those drivers you have are only 1 Ampere drivers.
You can't drive a P7 with them.
If you want modes then you need a dimmer not a driver.
Hi,
1 single P7 driver
1 quad P7 driver
2 dimmer
:thanks:
I have a question - would it be possible with one of your drivers to power one P7 using 6AA battries (7.2V) ?First version will be the version as before with a voltage range up to 10.5V.
For all those who wants to drive one emitter the second version is better suited which has a voltage range up to 4.2V.
Many thanks
Yes the MCE will works in parallel as well.
I can't make this driver. It is already the smallest size I could make.
I don't know it is possible but the driver can be filed down and one capacitor can be removed when using with batteries. the extra capacitor is for power suppliers. Then should fit into the batterytube of the C mag or maybe even between switch and heatsink