DimeRazorback
Flashlight Enthusiast
Well people, it has arrived!
The long awaited UB3T!
Pictures uploading now!
Wow is this thing bright! It's the middle of the day too!
*****************************************
The selector ring has a solid feel, with deep indents between each level. When in the "Off" position, you cannot activate the light. With the selector ring set on a level for example "Min" a light press of the tailcap will activate low, a harder press will go directly to high. The same is with constant on via twisting the tailcap. Twist a small amount for the selected output, twist further for high.
High mode is bright!
I will get some comparison beamshots of this, my M3LT and my M6 running a LF HO-M6R tonight.
Comparing the UB3T to my 400 lumen M3LT on my walls in daylight there is a big difference!
Hotspots are similar size, however the M3LT's disappears when the UB3T's is put over it.
I believe the UB3T is running a Cree XM-L.
Oh, and there is no oil slick
Unpacking:
Selector Ring:
Fuel Gauge
BEAMSHOTS!
The lineup is:
Control - No lights on
UB3T - High (800 lumens)
M3LT - High (400 lumens)
LX2 - High (200 lumens)
Wildcat V2 - High (350 lumens??)
M6 w/HO-M6R - 400 lumens??
Control
UB3T High
M3LT High
LX2 High
Wildcat V2 High
M6 w/HO-M6R
Comparison Pictures:
The long awaited UB3T!
Pictures uploading now!
Wow is this thing bright! It's the middle of the day too!
*****************************************
The selector ring has a solid feel, with deep indents between each level. When in the "Off" position, you cannot activate the light. With the selector ring set on a level for example "Min" a light press of the tailcap will activate low, a harder press will go directly to high. The same is with constant on via twisting the tailcap. Twist a small amount for the selected output, twist further for high.
High mode is bright!
I will get some comparison beamshots of this, my M3LT and my M6 running a LF HO-M6R tonight.
Comparing the UB3T to my 400 lumen M3LT on my walls in daylight there is a big difference!
Hotspots are similar size, however the M3LT's disappears when the UB3T's is put over it.
I believe the UB3T is running a Cree XM-L.
Oh, and there is no oil slick
Unpacking:
Selector Ring:
Fuel Gauge
BEAMSHOTS!
The lineup is:
Control - No lights on
UB3T - High (800 lumens)
M3LT - High (400 lumens)
LX2 - High (200 lumens)
Wildcat V2 - High (350 lumens??)
M6 w/HO-M6R - 400 lumens??
Control
UB3T High
M3LT High
LX2 High
Wildcat V2 High
M6 w/HO-M6R
Comparison Pictures:
Last edited: