#1 FOURSEVENS Knight and Paladin - PK collaboration!
- Thread starter 4sevens
- Start date
Help Support Candle Power Flashlight Forum
Thanks, a proto "Goldie" will be a case Queen so no worries.You have PM. keep in mind these are prototypes and they are as-is with no warranty. Don't loosen the tailcap too much
Yes,do you want me to number and sign it?
R1#1 - first stage, #1
Last edited:
I will take a "goldie" if you have any others!
4sevens
Flashlight Enthusiast
Thud: you have pm
Beamhead: here is a picture of yours
Unfortunately the permanent marker is no match for the pvd coating. It doesn't stick.
I made a quick count of the various revisions on my desk - here is what I have so far:
R1 3
R2 11
R3 3
R4 3
None of the protos are guaranteed to work. They are just pieces of history. R1 and R2 do not have threads in the front. R3 and R4 do.
I will likely keep one of each revision.
Attachments
4sevens
Flashlight Enthusiast
Thud: you have pm
Beamhead: here is a picture of yours
Unfortunately the permanent marker is no match for the pvd coating. It doesn't stick.
I made a quick count of the various revisions on my desk - here is what I have so far:
R1 3
R2 11
R3 3
R4 3
None of the protos are guaranteed to work. They are just pieces of history. R1 and R2 do not have threads in the front. R3 and R4 do.
I will likely keep one of each revision.
Perhaps such a wonderful piece of FourSevens history could be accompanied by a letter of authenticity and a signed picture of David holding it.
SWEET! :twothumbs~ Chance
Last edited:
:thanks: now to camp by the mailbox.......................Beamhead: here is a picture of yours
eraursls1984
Flashlight Enthusiast
I was thinking they could make up some business card size authentication cards. Leave the mode, revision, number, and signature blank when having them made. Then just fill one out with each prototype sold.
Something like this
Something like this
Mine just got here, very unique piece. Will post more later.
lightlover
Flashlight Enthusiast
Here is an option not mentioned yet, so I'll call it the "B.A.N." option (Buck A$$ Nekkid
)
lumenati
Newly Enlightened
Pretty! Pretty!
Last edited:
lightlover
Flashlight Enthusiast
.... very unique piece. Will post more later.
Waiting keenly, Sir Beamhead ...
lumenati - aint't it just so!
(I don't even like lights less than 120mm L ...)
Last edited:
Initial impressions:
Like jewelry
Hefty little booger, the grade of Ti is on par with much more expensive lights
The interface is easy (just confirmed medium can be saved if locked out from medium)
The beam is very nice
Bright
I like the switch
more to come..................
Like jewelry
Hefty little booger, the grade of Ti is on par with much more expensive lights
The interface is easy (just confirmed medium can be saved if locked out from medium)
The beam is very nice
Bright
I like the switch
more to come..................
lumenati
Newly Enlightened
Technical Difficulties! See below.
Last edited:
lumenati
Newly Enlightened
I previewed my pic and I realize it is too large but I do not know how to reduce it! That being said... I love this little light! It is far and away my favorite of all. I like everything about it! Exceptional in every way! Thanks Foursevens!
and PK!
lumenati shared my feelings, after spending the better part of the day with a couple of these they WENT YARD!
The thing I like best is most newer single 123 based lights are designed to run Li-Ion so on primaries you get a respectable but lower lumen output of 190-250, well the Paladin gives 450 on a primary.
And if you are so inclined even greater output on Li-Ion.Medium is rated at 100 lumens but seems brighter to me. The beam is flawless and very useful, it is not a thrower but that is to be expected with a light this size.
Fit and finish are impeccable and with all the different colored accessories and options IMHO it is masterful marketing as you can personalize your Knight/Paladin.
I tip my hat to both 47's and PK!:twothumbs
OpticalSerenity
Newly Enlightened
Can't wait to get my hands on one of these, but I fear it won't be enough to get just one. :twothumbs
