• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired 1200L 5 Cree 2" E2 Head By FiveMega

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,550
Location
California
[SIZE=+3](AVAILABLE)[/SIZE]​

[SIZE=+1]Please allow 7 days to ship[/SIZE]​


[SIZE=+1]Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.[/SIZE]


IMG_0316.jpg

Top: Gray 2x18650 "E" body + Gray flutted M*g "C" head
Mid Section: SS E body + nickel plated finned conical M*g "C" head.
Bottom: Black 2x18650 "E" body + black finned/flutted M*g "C" head.
Right side: Modified 5 Cree reflector assembly.
Lower right: Adapter with 2 O'rings.

[SIZE=+3]Please read carefully before ordering[/SIZE]

After long wait, limited quantity of these 2" turbo heads are available for $urefire "E" bodies.
Single mode 1200 Lumens DX 5 Cree lamp reflector assembly is machined (modified) to fit in your M*g "C" head then using provided adapter, your E seies body will fit into your M*g "C" head. Adapter is bare aluminum and can hardly seen when installed.
There is no further modification needed, no tool or special skill needed.
Result will be much brighter long throw with smaller but bright hot sopot.
Will work with single cell (3.7 volt) with excellent efficiency (long run) and really bright but 2 cells (8.4 V maximum) will produce ultimate brightness.
No flashlight body, tail cap, switch, head, lens or batteries included.
What you get is modified turbo 5 Cree LED/reflector assembly and adapter with 2 installed, o'rings.
Will fit all $urefire "E" bodies without pocket clip.
Excellent choice when used with:

E2 Body

SS Body

TS SS E Body

E head, C tail body

Double Head E Body
No reservation please. You must pay [SIZE=+2]FIRST[/SIZE] then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
Please don't pay if you may change your mind.
It is
[SIZE=+1]ABSOLUTELY NECESSARY[/SIZE] to pick [SIZE=+1] next [/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is
[SIZE=+1]ABSOLUTELY NECESSARY[/SIZE] to pick [SIZE=+1]next[/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is
[SIZE=+1]ABSOLUTELY NECESSARY[/SIZE] to pick [SIZE=+1] next [/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
Please do not send payment without above information
Example:
Mr Efire :paypal: for #95 5 Cree "E" kit
Price:
Cash Paypal $39
Please add 4% Paypal fee when paying from CC
Shipping to States $6 for 1st kit or $8 for 2 kits
Internationally $12 any quantity
Aluminum adapter without module $14 shipped anywehere
Please add 4% Paypal fee
Paypal:
[email protected]
Please PM for postal money order payment method.
Any comment welcome.

----------------------------
[SIZE=-2]#01 E kit 5 Cree tjhabak paid shipped 03103490000027889934
#02 E kit 5 Cree addictedmatt paid shipped 03112550000057986972
#03 E kit 5 Cree jwyj paid shipped CW203425985US
#04 E kit 5 Cree FatRat paid shipped 23082940000002466596
#05 E kit 5 Cree FatRat paid shipped 23082940000002466596
#06 E kit 5 Cree euroken paid shipped 9505510489373189446663
#07 E kit 5 Cree jonwkng paid shipped LC105690852US
#08 E kit 5 Cree non CPF paid shipped [/SIZE]
#09 E kit 5 Cree (AVAILABLE)
#10 E kit 5 Cree (AVAILABLE)
#11 E kit 5 Cree (AVAILABLE)
#12 E kit 5 Cree (AVAILABLE)
#14 E kit 5 Cree (AVAILABLE)
#15 E kit 5 Cree (AVAILABLE)
#16 E kit 5 Cree (AVAILABLE)

---------------------------
[SIZE=-2]#01 Aluminum adapter without module aeroflash paid shipped [/SIZE]
#02 Aluminum adapter without module (AVAILABLE)
#03 Aluminum adapter without module (AVAILABLE)

---------------------------
[SIZE=+1]Please find link of my other products[/SIZE] [SIZE=+2]here[/SIZE][SIZE=+1] and click on each link you are interested on.[/SIZE]
---------------------------
[SIZE=+3](A V A I L A B L E)[/SIZE]​
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,550
Location
California
***Question?***
What would shipping be if I buy your SS body at the same time? And where can I get the head that's in your pic above? Thanks!
Shipping for SS body will be free when purchased with above kit.
Pictured heads are custom modified but any M*g "C" head (C+serial number) will work.

==============
How well balanced is this setup with that mag head on the e body?
Similar to $urefire M4
==============
Is there any way, maybe by using a different adapter, or combination of adapters, to have this drop-in fit a "C" body?
It is possible to make such an adapter. However, these modules need 6~8.4 volt.
==============
With this adapter alone, can I use a stock C-mag head with its reflector and stock maglite bulbs with a e-series body?
With this adapter alone, you can use a stock C-Mag head with its camless reflector.
Stock maglite PR bulb is sitting on a M*g C switch and it won't fit inside e-series body.
What is your plan? Maybe I can help.
 
Last edited:

luopo

Newly Enlightened
Joined
Oct 11, 2009
Messages
53
What would shipping be if I buy your SS body at the same time? And where can I get the head that's in your pic above? Thanks!
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,550
Location
California
What would shipping be if I buy your SS body at the same time? And where can I get the head that's in your pic above? Thanks!
Shipping for SS body will be free when purchased with above kit.
Pictured heads are custom modified but any M*g "C" head (C+serial number) will work.
 

thundertree

Enlightened
Joined
Jan 12, 2012
Messages
209
Is there any way, maybe by using a different adapter, or combination of adapters, to have this drop-in fit a "C" body?

Much thanks!
 

FatRat

Newly Enlightened
Joined
Aug 18, 2010
Messages
165
Location
SW Florida
Paypal Sent!!

#75 Scalloped W/D tail cap (AVAILABLE) $24
#50 Scalloped SS tail cap (AVAILABLE) $18
#04 E kit 5 Cree (AVAILABLE) $39.00
#05 E kit 5 Cree (AVAILABLE) $39.00
#33 SS 18650 E Body $68 (AVAILABLE)
Extra replacement McClicky switch $10 (AVAILABLE)
2 Extra replacement switch seal $1 (AVAILABLE)
total=200.00-3o%=$140.00
shipping=19.50
ins=$5.20
total=164.70 + 4%=$171.28 Thank You!
 

euroken

Flashlight Enthusiast
Joined
Dec 26, 2008
Messages
1,602
Location
Washington
PP sent for:

#06 E kit 5 Cree (AVAILABLE)


$39 - 20% discount = 31.2 * 1.04 (fees as indicated on the thread) = $32.45


Please ship with my sleeves on my previous order!


#01 "C" 26 ... 19 ... 50mm $5 (AVAILABLE)


#03 "C" 26 ... 19 ... 100mm $6 (AVAILABLE)
#04 "C" 26 ... 19 ... 100mm $6 (AVAILABLE)
 

jonwkng

Flashlight Enthusiast
Joined
Jun 12, 2013
Messages
1,994
Location
Singapore
:paypal: for:-

#07 E kit 5 Cree (AVAILABLE) -> $31.20 (20% off) + International Shipping $12

Thank you!
 
Top