• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Cooly 26650 D26 (P60) Host By Fivemega (2)

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,601
Location
California
(AVAILABLE)

Please allow 7 days to ship

Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.

img_0363-jpg.jpg


As seen in above picture there is a hole on tail cap to use lanyard ring

OsfvykN


img_0446-jpg.jpg


From Left to Right: White Cooly-- Orange Cooly-- Black Anodized Heat Sinked Aluminum Sleeve-- Protected 18650

img_0417-jpg.jpg



img_0456-jpg.jpg


Dark Gray Cooly -- Black Anodized Heat Sinked Aluminum Sleeve -- IMR 18650

img0498ii.jpg



img_0474_zps20fa0f3c-1_zps7bb88670-jpg.jpg


Sky White----Matte Light Gray----Matte Black

NO RESERVATION

Hi folks, here is another creation from Fivemega.
A completely new design 1x26650 P60 body with D26 (P60 style) head available in black type III hard anodized, matte black type III hard anodized, Gray type III hard anodized, matte Gray type III hard anodized, semi gloss silver, matte silver, orange cerakoted and white cerakoted.
Body is designed to accept single IMR 26650 cell and total length is about 147mm. Head diameter is 44mm and body/tail diameter is 35mm
There is no removable head. Body and head is made from one piece solid aluminum (without gap) to accept any P60 stlye lamp/LED module for best heat sinkinking.
There is no bezel to cover head. Lamp/LED module is directly seated into cave metal which is outside finned for maximum cooling. There is no threads (gap) to interrupt heat transfer.
Entire body has fine fins and head side very deep fine fins to maximize heat dissipating and I guarantee you will notice it while using high power LED. Entire body and head side has mill work to ensure best grip while friendly with hand. Head side also is crenellated for best visibility when light is "ON" and faced down.
One small stainless steel ring will hold lamp module and one bigger stainless steel will hold UCL lens. All included.
There is one o'ring under lens, two o'ring on tai side. Tail cap has McClickie installed and ready to use.
McClicky switch is standard for Cooly and can handle up to 5 Amps safely.
Drop in the P60 module and tighten with small SS ring then put o'ring, lens and finally large SS ring to hold it in place and seal against moisture. Tightening SS rings are easy and can be done by pair of needle nose pliers.
Remember, there is no need of buying $urefire or aftermarket bezel. What you get here is a complete host for your LED module and your IMR26650
I strongly recommend nailbender's excellent XML
Since IMR cells are capable of very high drain, therefore no problem with high drain (P60 style) LED modules.
What you will receive is complete host including one piece body/head, tail cap with installed switch, 2 SS bezels, UCL lens and all required o'rings. No battery and No module included or offered. Black aluminum heat sinked 18650 sleeve is not included but optional for $18
Price:
$99 for HA Black (NOT AVAILABLE)
$99 for HA Matte Black (AVAILABLE)
$99 for HA matte Light Gray (AVAILABLE)
$89 for HA dark Gray (AVAILABLE)
$99 for Matte Silver (nickel plated) (NOT AVAILABLE)
$99 for Semi Gloss silver (nickel plated) (NOT AVAILABLE)
$109 for Orange cerakote (NOT AVAILABLE)
$109 for White cerakote (NOT AVAILABLE)
Black aluminum heat sinked 18650 sleeve $18 (NOT AVAILABLE)
White PVC 18650 sleeve $5 (AVAILABLE)
Each extra switch $8 (AVAILABLE)
Each extra UCL lens $6 (AVAILABLE)
Black extra switch boot $1 (NOT AVAILABLE)
Orange switch boot $1 (NOT AVAILABLE)
GID switch boot $1 (AVAILABLE)
Shipping to States $8.00
Internationally $18
Insurance for $100 value (USA) $2.60 OPTIONAL
Insurance for $100 value (international) $6.75 OPTIONAL
Shipping fee is nonrefundable

NO RESERVATION

No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
Please don't pay if you may change your mind. There will not be any refund.
It is ABSOLUTELY NECESSARY to pick available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY to pick available and valid number, post detail of your order here and paypal note along with your CPF handle.[
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
Example:
Mr Don26
paypal.gif%22 border=%220%22 smilieid=%2255

paid for #78 black
All international packages must be with printed name and address in English and include a phone number.

Paypal: [email protected]
Please PM for postal money order payment.
----------------------
Please see:
2P 18650 D26
Beefy Bezel
D36 bodies
E bodies
MN sockets
SS 18650 E body
E to C adapter
Mini Turbo Head
Deep Turbo Head
D36 bodies
----------------------

-----------------------
#01 Black ceracoated COOLY 1x26650 D26 $99 Grahambo0101 paid shipped 9505511144965124568973
-----------------------
#01 HA Black COOLY 1x26650 D26 (BLEMISHED) $90 Zeruel paid shipped LC452889526US<b
#02 HA Black COOLY 1x26650 D26 (BLEMISHED) $90 alby26 paid shipped 03112550000058021375
#03 HA Black COOLY 1x26650 D26 (BLEMISHED) $90 Raoul_Duke paid shipped LC548063799US
#04 HA Black COOLY 1x26650 D26 (BLEMISHED) $90 firefighterb paid shipped 03112550000058022143

-----------------------

-----------------------
#01 HA Matte Black COOLY 1x26650 D26 $79 (BLEMISHED) mjgsxr paid shipped LA046635994US
#02 HA Matte Black COOLY 1x26650 D26 $79 (BLEMISHED) djeucalyptus paid shipped 9500113808434081610046

#03 HA Matte Black COOLY 1x26650 D26 $79 (BLEMISHED) (AVAILABLE)
#04 HA Matte Black COOLY 1x26650 D26 $79 (BLEMISHED) (AVAILABLE)
#05 HA Matte Black COOLY 1x26650 D26 $79 (BLEMISHED) (AVAILABLE)
-----------------------

-----------------------



-----------------------
-----------------------
#01 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $89 Boss paid shipped 9114901159815942858684
#02 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $89 leroy82646 paid shipped 9114999944238678055689
#03 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $89 msim paid shipped 9114999944238373526415
#04 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $89 nfsunder paid shipped 9505513808431061374885
#05 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $84 Mesa232323 paid shipped 9505513808432325491607

#06 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $84 (AVAILABLE)
#07 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $84 (AVAILABLE)
#08 HA Matte Light Gray COOLY 1x26650 D26 (BLEMISHED) $84 (AVAILABLE)

=============



-----------------------



--------------------------------
==================


-----------------------
#01 Orange cerakoted COOLY 1x26650 D26 $99 (Blemished) flashy bazook paid shipped 9505513808438003116633

-----------------------
#01 Sky White cerakoted COOLY 1x26650 D26 $109 Thatspec paid shipped 03112550000057987030
#02 Sky White cerakoted COOLY 1x26650 D26 $109 tanasit paid shipped 03112550000057989348
#03 Sky White cerakoted COOLY 1x26650 D26 $109 abanytime paid shipped 23082940000002467760
#04 Sky White cerakoted COOLY 1x26650 D26 $109 LuxLuthor paid shipped 23082940000002467777
#05 Sky White cerakoted COOLY 1x26650 D26 $109 jmpaul320 paid shipped 03112550000058001520
#06 Sky White cerakoted COOLY 1x26650 D26 $109 firefighterb paid shipped 23082940000002467920
#07 Sky White cerakoted COOLY 1x26650 D26 $109 choppers paid shipped 03113260000160937011
#08 Sky White cerakoted COOLY 1x26650 D26 $109 chrisWELD paid shipped LC740353844US
#09 Sky White cerakoted COOLY 1x26650 D26 $109 lensman paid shipped 23101590000030166946
#10 Sky White cerakoted COOLY 1x26650 D26 $109 dsche paid shipped 23041070000024631832
#11 Sky White cerakoted COOLY 1x26650 D26 $109 dlmorgan999 paid shipped 95055106702831004741
#12 Sky White cerakoted COOLY 1x26650 D26 $109 hombreluhrs paid shipped 9505510489373189446519
#14 Sky White cerakoted COOLY 1x26650 D26 $109 Grahambo0101 paid shipped 9505511144965124568973
#15 Sky White cerakoted COOLY 1x26650 D26 $109 Jvvjvv paid shipped 9505511144965138570757
#16 Sky White cerakoted COOLY 1x26650 D26 $109 Powerup paid shipped 9505513808436019092460
#17 Sky White cerakoted COOLY 1x26650 D26 $109 Flash-O-Maniac paid shipped 9505513808416251020230
#18 Sky White cerakoted COOLY 1x26650 D26 $109 Dizney paid shipped 9505513808412025426383


-----------------------
#01 Sky White cerakoted COOLY 1x26650 D26 (Blemished) $99 aginthelaw paid shipped 9505513808417222091778
-----------------------
#01 Sky White cerakoted COOLY with black tailcap 1x26650 D26 $99 (AVAILABLE)
-----------------------
NO RESERVATION

-----------------------
Please find link of my other products here and click on each link you are interested on.
-----------------------

(A V A I L A B L E)
 
Last edited:
QUESTION ???

:paypal: For 1 COOLY (#1) and 1 extra UCL.

These look AWESOME FM!
And priced right !!!
=======

P.S there is no # 13???
#13 was broken during machining. :crackup:
=======

Will there be more in the future ?
Yes, there will be more.
=======

Are the mcclicky adapters glued in this time FM??
No glue is used. Use a pair of needle nose pliers and unscrew the switch housing ring from cap then remove McClicky.
=======

any plans for a comparable D36 model?
Currently, there are several type of D36 available such as: 32650, 3x26500, 2x18650 and 2x18500
=======

How does the Matte Black COOLY differ from the Black COOLY? Is it hard anodized? Is the tailcap also Matte Black and is the tailcap the same tone?

Matte Black is non-reflective surface with no shine at all.
Tail cap color tone is pretty close to body.
Body and tail both are TYPE III HARD ANODIZE

=======

Varooj...why don't you make us a copper Cooly 26650? Paypal standing by!

Wow,
That would be heavy, expensive and CCOOLL.

=======
One quick question, protected 26650 won't fit?

Any protected 26650 up to 70mm long will fit perfectly and function correctly.
=======
y0ukn0wwh0 said:
I'm interested in either the Sky White, Matte Silver or Gray, are these colors available at the moment?

Post #1 is updated for availability.
=======
y0ukn0wwh0 said:
Light with GITD and Red Boot

Please refer to updated post #1.
=======
y0ukn0wwh0 said:
Battery Sleeve

18650 Battery Sleeve available now.
=======
y0ukn0wwh0 said:
Extra Orings and Lens

Extra Orings and Lens available now.
=======
y0ukn0wwh0 said:
Pocket clip available (if Available) or is it a BAD IDEA

Pocket clip not available and never made.
=======
y0ukn0wwh0 said:
Will a Hi/Lo/Strobe work

If your module has Hi/Lo/Strobe, then will work perfectly.
=======
Any chance that we might see from you a cooly 26650 made from copper soon?

Not to mention high cost, weight of copper Cooly will be too heavy to carry.
=======
Does a sportac (non-SF version) P60 fits?

Cooly has deeper and recessed cave to accommodate most of drop ins.
=======
Have you considered making a matching extension for 2x26650 setups?.
Unfortunately, not many interest for that.
=======
Hi are these good for diving and are they still available?
These are available at this time but not suitable for diving.
These are waterproof or splashproof.

=======
So post #1 is currently updated now? Looks like several matte black available?
Currently, matte black, dark grey, light grey and white available.
Please see post #1
 
Last edited:
Top