Sold/Expired 2 & 3x26500 Exotic M*g body by FiveMega

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,342
Location
California
[SIZE=+3]
(AVAILABLE)​
[/SIZE]

[SIZE=+1]Please allow 7 days to ship[/SIZE]​


[SIZE=+1]Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.[/SIZE]


P1010301.jpg

P1010301-1.jpg

P1010304-1.jpg

P1010313.jpg

IMG_0812_zpstrdndpy4.jpg



[SIZE=+4]
Absolutely NO reservation
Please read completly​
[/SIZE]


Hi folks, Here I have some more new toys for you.
These bodies are made from scratch to take M*g D head and accomodate 2 IMR26500 or 3 IMR26500 cells.
Will take this type of bi pin sockets and since bulb tower is part of body and machined from solid 6061 bar and there is no moving parts or extra connectors therefore resistance is almost ZERO which is excellent for higher current bulbs with minimum voltage loss.
Bodies do not use space wasting long switch so total length is much shorter than stock M*g. 2x26500 is 2" shorter than stock 2C M*g and 3x26500 is almost size of stock 2C M*g.
Each body is diamond machined with superior grip and royal look and comes with one head side o'ring and 2 tail cap O'rings, tail cap and switch boot.
All bodies and tail caps are hard anodized in Black, Red, Blue, Green, Gun metal gray, Natural gray, Nickel plated and Gold plated.
Picture shows 2x26500 body which is size of shortened 1C M*g.
Tail cap has attractive scalloped milling machined so can be used in stand up (candle mode) and you can use your strap too.
Tail cap can accept either version B of these switch NOT INCLUDED or I can install McClicky switch for $20 extra.
Installed McClickie is only an option for $20 extra.
Switch boot is easier to operate with choice of black or green GID
Will take all camless M*g D head, FM3 and FM3.5 heads (NOT INCLUDED)
Some M*g "D" heads are available here and Crown bezels are available here.

Advantages:
Ready to use 26mm diameter cells without needs of machining with minimum length.
Extra ordinary look, best grip, minimum resistance and tail operating switch similar to tactical lights.
What you get is:
1- Body with bulb colar and 3 o'rings installed
2- Tail cap with switch boot installed
No head, no switch, no bulb, no batteries and no charger included.

Price:
HA 2x26500 With McClicky installed $108 (AVAILABLE)
HA 3x26500 With McClicky installed $109 (AVAILABLE)
HA 2x26500 Without Switch $88 (AVAILABLE)
HA 3x26500 Without Switch $89 (AVAILABLE)
Gold plated 2x26500 $118 (NOT AVAILABLE)
Gold plated 3x26500 $122 (NOT AVAILABLE)
Extra McClicky switch $10 (AVAILABLE) WITH PURCHASE OF FLASHLIGHT
SS Bi-pin socket $17 SOLD OUT
Brass Bi-pin socket $14 SOLD OUT
6.6 volt, 3,3 A custom made axial bulb $10 each (AVAILABLE) WITH PURCHASE OF FLASHLIGHT
Pelican 3853 $10 pack (AVAILABLE) WITH PURCHASE OF FLASHLIGHT
Pelican 3854 $10 pack (NOT AVAILABLE) WITH PURCHASE OF FLASHLIGHT
WA1274 $6 each (AVAILABLE) WITH PURCHASE OF FLASHLIGHT
WA1166 $6 each (AVAILABLE) WITH PURCHASE OF FLASHLIGHT
Shipping to States $6 (any quantity)
Internationaly $14 for each body
Please add 4% to total for CC paypal fee.

No reservation please. You must pay [SIZE=+2]FIRST[/SIZE] then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
Please don't pay if you may change your mind. There will not be any refund.
It is [SIZE=+1]ABSOLUTELY NECESSARY[/SIZE] to pick [SIZE=+1] next [/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is [SIZE=+1]ABSOLUTELY NECESSARY[/SIZE] to pick [SIZE=+1]next[/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is [SIZE=+1]ABSOLUTELY NECESSARY[/SIZE] to pick [SIZE=+1] next [/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
Please do not send payment without above information
Example:
Mr Mugfire :paypal: for #68 3x26500 with black boot
Paypal: [email protected]
Please PM for postal money order payment.
Any comment welcome.
---------------------
[SIZE=-2]#01 Blue 2x26500 $88 3rdrock paid shipped[/SIZE]
#02 Blue 2x26500 $88 (AVAILABLE)
#03 Blue 2x26500 $88 (AVAILABLE)
---------------------
[SIZE=-2]#01 Green 2x26500 $88 lctorana paid shipped
#02 Green 2x26500 $88 LuxLuthor paid shipped[/SIZE]
#03 Green 2x26500 $88 (AVAILABLE)
#04 Green 2x26500 $88 (AVAILABLE)
---------------------
[SIZE=-2]#01 Red 2x26500 $88 tanasit paid shipped
#02 Red 2x26500 $88 nailbender paid paid shipped 2308044000002617XXXX
#03 Red 2x26500 $88 Bob96 paid shipped 23082180000028797113[/SIZE]
#04 Red 2x26500 $88 (AVAILABLE)
#05 Red 2x26500 $88 (AVAILABLE)
---------------------
[SIZE=-2]#01 Gun metal gray 2x26500 $88 Bob96 paid shipped 23051590000171627786[/SIZE]
#02 Gun metal gray 2x26500 $88 (AVAILABLE)
#03 Gun metal gray 2x26500 $88 (AVAILABLE)
#04 Gun metal gray 2x26500 $88 (AVAILABLE)
#05 Gun metal gray 2x26500 $88 (AVAILABLE)
----------------------
#01 Natural gray 2x26500 $88 (AVAILABLE)
#02 Natural gray 2x26500 $88 (AVAILABLE)
----------------------
#01 Natural gray 2x26500 (BLEMISHED) $78 (AVAILABLE)
----------------------
[SIZE=-2]#01 Black 2x26500 $88 Jay T paid shipped
#02 Black 2x26500 $88 flashfiend paid shipped 03092880000111125227
#03 Black 2x26500 $88 tjhabak paid shipped 23082180000028852799
#04 Black 2x26500 $88 donn_ paid shipped 95001105183530435639[/SIZE]
#05 Black 2x26500 $88 (AVAILABLE)
---------------------
[SIZE=-2]#01 Nickel plated 2x26500 $88 tanasit paid shipped
#02 Nickel plated 2x26500 $88 Bob96 paid shipped 23082180000028872506[/SIZE]
---------------------
[SIZE=-2]#01 Gold plated 2x26500 $118 LuxLuthor paid shipped
#02 Gold plated 2x26500 $118 tanasit paid shipped
#02 Gold plated 2x26500 $118 wrf paid shipped 23082180000028852775[/SIZE]
================================================
[SIZE=-2]#01 Blue 3x26500 $89 wrf paid shipped 23082180000028852775
#02 Blue 3x26500 $89 wrf paid shipped 23082180000028852775
#03 Blue 3x26500 $89 wrf paid shipped 23082180000028852775[/SIZE]
---------------------
[SIZE=-2]#01 Green 3x26500 $89 Billy Ram paid shipped 0309114000004635XXXX
#02 Green 3x26500 $89 Icarus paid shipped 9505513808426215005630 [/SIZE]
#03 Green 3x26500 $89 (AVAILABLE)
---------------------
[SIZE=-2]#01 Red 3x26500 $89 Joe_torch paid shipped
#02 Red 3x26500 $89 nailbender paid paid shipped 2308044000002617XXXX
#03 Red 3x26500 $89 choppers paid shipped 0308073000016683XXXX
#04 Red 3x26500 $89 wrf paid shipped 23082180000028852775
#04 Red 3x26500 $89 choppers paid shipped 03110240000019943083[/SIZE]
---------------------
[SIZE=-2]#01 Gun metal gray 3x26500 $89 Nite paid shipped 2308218000002886XXXX
#02 Gun metal gray 3x26500 $89 Bob96 paid shipped 23082180000028880112
#03 Gun metal gray 3x26500 $89 tjhabak paid shipped 23082180000028852799[/SIZE]
#04 Gun metal gray 3x26500 $89 (AVAILABLE)
#05 Gun metal gray 3x26500 $89 (AVAILABLE)
----------------------
[SIZE=-2]#01 Natural gray 3x26500 $89 thundertree paid shipped 23082940000035401274
#02 Natural gray 3x26500 $89 Icarus paid shipped 9505513808426215005630
#03 Natural gray 3x26500 $89 Icarus paid shipped 9505513808426215005630 [/SIZE]
#04 Natural gray 3x26500 $89 (AVAILABLE)
----------------------
[SIZE=-2]#01 Black 3x26500 $89 wrf paid shipped 2308044000002617XXXX
#02 Black 3x26500 $89 wrf paid shipped 2308044000002617XXXX
#03 Black 3x26500 $89 wrf paid shipped 2308044000002617XXXX
#04 Black 3x26500 $89 wrf paid shipped 2308044000002617XXXX
#05 Black 3x26500 $89 wrf paid shipped 2308044000002617XXXX
#06 Black 3x26500 $89 wrf paid shipped 23082180000028852775[/SIZE]
---------------------
[SIZE=-2]#01 Nickel plated 3x26500 $89 tanasit paid shipped
#02 Nickel plated 3x26500 $89 Bob96 paid shipped 23082180000028880105[/SIZE]
---------------------
[SIZE=-2]#01 Gold plated 3x26500 $122 LuxLuthor paid shipped
#02 Gold plated 3x26500 $122 Bob96 paid shipped 23082180000028880211[/SIZE]

---------------------
[SIZE=+1]Please find link of my other products[/SIZE] [SIZE=+2]here[/SIZE][SIZE=+1] and click on each link you are interested on.[/SIZE]
---------------------
[SIZE=+3]
(A V A I L A B L E)​
[/SIZE]
 
Last edited:

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,342
Location
California
[size=+2]WA1274 with 2x26500 :thumbsup:
WA1166 with 3x26500 :thumbsup:
FM1909 with 3x26500 :thumbsup: :thumbsup: :thumbsup:

I do not recommend WA1111 with 2x26500
I do not recommend 5761 with 2x26500
I do not recommend WA1185 with 3x26500

All red prints are close to instaflashing point but using soft start switch may save the bulb.[/size]
 
Last edited:

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,342
Location
California
[size=+2]
Do not use WA1111 with 2x26500
Do not use 5761 with 2x26500
Do not use WA1185 with 3x26500

Using soft start switch is smart choice but not necessary.[/size]


Excellent product!:thumbsup:


Why not? :confused:

If you use any of mentioned bulb in M*glite without poof is because of extra resistance in M*g switch which causes some voltage loss.
 

Jay T

Enlightened
Joined
Dec 8, 2006
Messages
372
:paypal: fer

#01 Black 2x26500
McClickie option
Brass Bi-pin socket
3 X 6.6 volt, 3,3 Axial bulb
 

^^Nova^^

Enlightened
Joined
Aug 4, 2008
Messages
388
Location
Australia
I assume ROP bulbs will work in this body? Or is the positive contact under the bulb base specific for the bi-pin adapter?

Awesome looking gear as usual FM.

Cheers,
Nova
 

lctorana

Flashlight Enthusiast
Joined
Jun 28, 2007
Messages
2,123
Location
Melbourne, Australia
:paypal:for:

#01 Green 2x26500 $88
2 x
6.6 volt, 3,3 A custom made axial bulb $20
International shipping $10
Total $118

This will be the sixth torch I've bought from you this month! Arrgh!
 

lctorana

Flashlight Enthusiast
Joined
Jun 28, 2007
Messages
2,123
Location
Melbourne, Australia
I assume ROP bulbs will work in this body? Or is the positive contact under the bulb base specific for the bi-pin adapter?

Awesome looking gear as usual FM.

Cheers,
Nova
+1 on both question and comment!

I would love to try the Pelican 3853H, and these are among the nicest looking torches I have ever seen!
 

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,342
Location
California
I assume ROP bulbs will work in this body? Or is the positive contact under the bulb base specific for the bi-pin adapter?

Awesome looking gear as usual FM.

Cheers,
Nova

This will be possible with adding globe of tin on center contact of ROP bulb.

I don't recommend magnet since they may move.
 
Last edited:

^^Nova^^

Enlightened
Joined
Aug 4, 2008
Messages
388
Location
Australia
I love the pictured green head. Any chance you can sell me your sample?:aaa:
You know, I was going to ask the same thing about the red one, but with a crown bezel. Gray would be cool also.

Any chance we could get you to do a run of HA heads like these FM?

Cheers,
Nova
 

LuxLuthor

Flashaholic
Joined
Nov 5, 2005
Messages
10,416
Location
CT
#01 Gold plated 2x26500 $118 Black Boot
#01 Gold plated 3x26500 $122 Black Boot

Let's see that looks like $246 with shipping. Your artistry dazzles me. :paypal:




 
Last edited:

lctorana

Flashlight Enthusiast
Joined
Jun 28, 2007
Messages
2,123
Location
Melbourne, Australia
One more question.

If a standard M*g head can be used, and there are no moving parts, then what holds the reflector in place? It isn't held at the rim, and I see no spring to push the reflector forward against the top of the head, so how does it work? And can is the focus adjustable?

(I know that's three questions, but it's really the same question restated in three different ways.)
 

LuxLuthor

Flashaholic
Joined
Nov 5, 2005
Messages
10,416
Location
CT
One more question.

If a standard M*g head can be used, and there are no moving parts, then what holds the reflector in place? It isn't held at the rim, and I see no spring to push the reflector forward against the top of the head, so how does it work? And can is the focus adjustable?

(I know that's three questions, but it's really the same question restated in three different ways.)

I'm confused by your question, as all my reflectors are held in the head by the top edge of reflector and the bezel/lens tightening down against reflector. Otherwise every time you unscrewed a Mag head from the body/neck, the reflector would fall down from the bottom of head which is too narrow to allow that. There would be some degree of focus adjustment depending on the bulb size/position in holder.
 

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,342
Location
California
One more question.

If a standard M*g head can be used, and there are no moving parts, then what holds the reflector in place? It isn't held at the rim, and I see no spring to push the reflector forward against the top of the head, so how does it work? And can is the focus adjustable?

Large edge area of M*g reflector seats slightly higher than edge of head and sandwitches between lens and head edge by bezel and it's o'ring.
Knowing that you need to use camless reflector in this flashlight, M*g body has 20 teeth/inch so each turn of head will travel reflector 1/20 of inch in (forward) or out (reverse) compare to bulb fillament which is fixed without moving and this will allow you to focus it.
 

lctorana

Flashlight Enthusiast
Joined
Jun 28, 2007
Messages
2,123
Location
Melbourne, Australia
Thanks guys. Apologies for asking such a genuinely stupid question.

Someone else posted about "cranial flatulence" yesterday; I must be suffering from it myself.

I need to get back into that state of Transcendental Incandescence.

Normal service can now resume.

PS - still want to buy that scalloped green head...
 

ElectronGuru

Flashaholic
Joined
Aug 18, 2007
Messages
6,053
Location
Oregon
You know, I was going to ask the same thing about the red one, but with a crown bezel. Gray would be cool also.

Looks to me like his existing line of turbo heads match in color:

https://www.candlepowerforums.com/threads/226585

P1010350.jpg


P1010301-1.jpg


Just keep in mind that with auto exposure, bright backgrounds often make for dark subjects. Hopefully, we can get one photo showing matched sets.
 
Last edited:

gswitter

Flashlight Enthusiast
Joined
Apr 26, 2006
Messages
2,586
Location
California
Tail cap can accept either version B of these switch NOT INCLUDED or I can install McClicky switch for $20 extra.
Installed McClickie is only an option for $20 extra.
Just to clarify...

Is the retaining ring for the McClicky included if we don't opt for the $20 option? Or can we purchase the retaining ring separately?

I already have plenty of McClicky switches.
 

Latest posts

Top