Got 2 BugOutGear P60 modules today for a pair of Surefire Scout weaponlights lights that had been converted to the P60/61 Lamps with the LU60 heads.
Initially upon installing I had no light at all, then I realized that the modules I ordered were the ones without the spring and seemed to have a ground problem. Just placing the module in the light body andl letting it touch the side of the body at the base gave light from the LED.
I used a circular part of the spring from a dead P60 around the brass part of the module to allow contact with the light body and perfect function on both Scout lights.
This was verified with a mag of Mk262 from my SBR on both lights.
Many thanks BugOutGear.
Initially upon installing I had no light at all, then I realized that the modules I ordered were the ones without the spring and seemed to have a ground problem. Just placing the module in the light body andl letting it touch the side of the body at the base gave light from the LED.
I used a circular part of the spring from a dead P60 around the brass part of the module to allow contact with the light body and perfect function on both Scout lights.
This was verified with a mag of Mk262 from my SBR on both lights.
Many thanks BugOutGear.
