Sold/Expired Anto's v1.1 1.4A XP-G R4/R5 1mode/3mode P60 Dropins. OPEN SALES

[Anto]

Anto's v1.1 1.4A XP-G R4/R5 1mode/3mode P60 Dropins

Continued from pt.1 here

Original Interest Thread


Modules Available:

51. 1C R5 Single Mode $45
50. 1C R5 Single Mode *SOLD to kyhunter1*shipped

*Sales up to #50+ have been lost due to the crash*

38. 0D0 R5 3 mode-*SOLD to hondaexp*shipped
37. 0D0 R5 3 mode*SOLD to seahunt*shipped
36. 0D0 R5 3 mode*SOLD to seahunt*shipped
35. 5B1 R4 Single Mode*SOLD to flash_back*shipped
34. 5B1 R4 Single Mode*SOLD to kyhunter1*shipped


31. 0D0 R5 Single Mode*SOLD to Kid9P*shipped
30. 0D0 R5 3 mode*SOLD to Gregozedobe*shipped
29. 0D0 R5 3 mode*SOLD to Jimed315*shipped
28. 0D0 R5 3 mode *SOLD to mandrake*shipped

26. 5B1 R4 3 mode*SOLD to Caroso*shipped
25. 0D0 R5 Single Mode *SOLD to openbolt1*shipped
24. 0D0 R5 Single Mode*SOLD to hondaexp*shipped
23. 5B1 R4 Single Mode*SOLD to asiandunn30*shipped
22. R5 Single Mode*SOLD to autogiro*shipped
21. R5 Single Mode*SOLD to mandrake*shipped
20. R5 Single Mode*SOLD to divine*shipped
19. kyhunter1*pmed*paid*shipped
18. bigchelis*pmed*paid*shipped
16. jabe1*pmed*paid*shipped
11. jasong911*pmed*shipped
7. FlaCracker*constructing*pmed*shipped
4. BSBG*constructing*pmed*paid*shipped


Pricing:

1C0 bin (Cool) XP-G R5 1.4A 3 mode dropin - $50 shipped
1C0 bin (Cool) XP-G R5 1.4A single mode dropin - $45 shipped
0D0 bin (Cool) XP-G R5 1.4A 3 mode dropin - $51 shipped
0D0 bin (Cool) XP-G R5 1.4A single mode dropin - $46 shipped
5B1 bin (Neutral) XP-G R4 1.4A 3 mode dropin - $50 shipped
5B1 bin (Neutral) XP-G R4 1.4A single mode dropin - $45 shipped


Click here for a graph of bin tints.

All prices are shipped CONUS, for Personal Paypal,
(Click the "Personal" tab under "Send Money" and send as a "Gift" or "Payment Owed")
Anything other than Personal PP , add $1 to cover fees, Insurance, add $2.
(Not responsible for lost packages without it)


Features:

- P60 Dropin
- Solid copper slug thermally bonded to base
- Reflector is thermally bonded to base
- Electronics & leads are fully potted with thermally conductive compound
- Inner spring is epoxy bonded to driver board
- 1.4A single stage / 3 stage board, powering an XP-G R4/R5 emitter
- Runs most efficiently with 1x Li-ion (2x123 can be used intermittently, 6V max input)
- Copper strip included for maximum heat transfer from dropin to host body
- Designed to be able to withstand heavy shock for weaponlight applications

Changes:
- Switched from copper strip to tape.
- Dropins are cleaned & coated with DeoxIT GOLD before shipping.
- 41% bigger heatsink compared with v1.

Output:
369 lumens initial turn on
300(minimum)+ OTF lumens after settling @ 5+ mins / R5
R4 is slightly lower.


Due to the nature of the 7135 boards & varying XP-G Vf's, I will not be making any regulation claims. However, XP-G's naturally have a lower Vf (3.3-3.4), and when tested out of 4 modules, pulled 1.4a from a fully charged 4.2v Trustfire 2400mah 18650 and still managed to pull an average of ~1.2A from a 18650 after it drained to 3.64V(~95mins). This will vary depending on what 18650 cell is used. In addition, reverse polarity will destroy these boards (single stage).


PP addy is:

Do not send PP unless asked to. I will be messaging members when their module is ready.



Old heatsink vs new heatsink

5B1 tint vs 0D0 tint:

Comparison vs P60L (80 OTF lumens)

 

[Sgt. LED]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

These look awesome. I love all the heat management involved. Anything optional at this point?
Like LED tint, reflector finish, etc? I like neutral tints and smooth reflectors personally. So it's about a month and a half till you are buried under dozens of 3 mode orders?

 

[kyhunter1]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

I have to agree with Sgt., they rock! Will most likely be in for another when they come available especially the sst options. I really like the look of the way the spring board is done now on the back of the drop in.

 

[Anto]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

I ordered the best tints I could find, but they're not coming in for a few weeks. I was aiming for 1A R5 but only managed to get 0D for this next batch. Ordered 5B1 R4's as well.

SMO reflector is an option, but it would be a different reflector design - not sure how the beam pattern would turn out. It's possible though.

I'm thinking something along the lines of a 3mode, R4 5B1 SMO reflector would fit you well.

 

[Sgt. LED]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

Oooooh that sounds really nice!!! 3 mode neutral goodness.
If the smooth reflector doesn't throw much further than the OP then I'll stick to the OP reflector and be happy. Don't spend too much time tinkering with it if there is little gain. I have other drop-in's if I need big throw anyway.

I leave it to your better judgement, just shoot me a PM when it's ready and I'll send off the PP right away.

 

[Anto]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

PM'ed some more members.
I'm starting to skip over users who have been inactive / not responding.

 

[FlaCracker]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

 

[jasong911]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2



--Jason

 

[Anto]

Re: Anto's fully potted & heatsinked v1.1 1.4A XP-G R5 P60 Dropin pt.2

PP received! Shipping out both packages w/insurance before I head to work today.

Thanks for the support!

 

[divine]

I saw some people asking about an option for a 3 mode and you saying that you can't find a high current 3 mode driver.

It is really tough to see a difference in output between say 1 amp and 1.4 amps. Mostly what you gain with that jump in output is lost runtime.

If you're looking at a very far distance, you might see a little difference.

I think a good 1.2 amp, 3 mode driver would be perfect for this.


I'll probably order another one in neutral, 3 mode when they become available.

 

[Anto]

PP received!

I'm actually waiting on 1.4A drivers currently. I posted a feeler thread and the general consensus was 1.4A only. I may do a different run if many people request it.

I saw some people asking about an option for a 3 mode and you saying that you can't find a high current 3 mode driver.

It is really tough to see a difference in output between say 1 amp and 1.4 amps. Mostly what you gain with that jump in output is lost runtime.

If you're looking at a very far distance, you might see a little difference.

I think a good 1.2 amp, 3 mode driver would be perfect for this.


I'll probably order another one in neutral, 3 mode when they become available.

 

[divine]

It showed up today, I missed the post and thought I was still waiting on a shipping notice. I'm alright with getting the drop-in first.


This thing is really nice. It looks like double the output of the Deerelight 1.5a module I got. (Maybe there is something wrong with that! It would explain the lack of output difference from 1.2 to 1.5.) Excellent beam and excellent tint, very close to white. I say it is somewhere around WD to WC tint as far as R2's go.

 

[Anto]

One more up for sale. New batch coming soon. Work's been crazy.

 

[mandrake]

paypal sent

 

[autogiro]

22. R5 Single Mode*Available

Auto



Auto

 

[openbolt1]

It showed up today, I missed the post and thought I was still waiting on a shipping notice. I'm alright with getting the drop-in first.


This thing is really nice. It looks like double the output of the Deerelight 1.5a module I got. (Maybe there is something wrong with that! It would explain the lack of output difference from 1.2 to 1.5.) Excellent beam and excellent tint, very close to white. I say it is somewhere around WD to WC tint as far as R2's go.

I need one too...

22. R5 Single Mode*Available

Auto

 

[Anto]

auto, PM sent.

openbolt, i'm going to be posting up more soon.

 

[oef24]

I am in for one. Please contact me ASAP. Thanks.

O

 

[Anto]

8 new modules ready, check the available modules list! This batch consists of binned LED's including the R4 5B1 & R5 0D0, as well as 1.4a three mode boards!
Please post in the thread (easier to keep track) and I'll PM you.

 

[edek130]

Hi Anto,

any chance of beamshots?

Thanks,
Ernye