Sabrewolf
Flashlight Enthusiast
P7 EDC Trustfire TR-801 w/multimode driver 125.00 U.S. ship incl, Sold
Red Aspheric Single Cell 5-Mode Mini-Mag 40.00 U.S. ship incl, intl xtra
White Aspheric Single Cell 5-Mode Mini-Mag 40.00 U.S. ship incl, intl xtra
Black 2-D Mag with battery meter, 3-Mode, P7 CSWOI Emitter Sold
Silver 2-D Mag with battery meter, 3-Mode, P7 CSWOI Emitter 215.00
Both 2-D Mags Have U.S. Shipping included, Intl Extra..
Okeedokee, A Group Photo
As you can see, Lots-o-Lights up for Grabs
Lets start with the little guys first..
These little guys had a life once as 2AA mini-mags...
But i couldn't leave them like that! I Mini-Me'ed them, and
made them 5-Mode Key-Chainers :devil:
Specs:
White and Red Osram Dragon Led's From Digikey,
White
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=475-2587-1-ND
Red/Amber
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=475-2580-1-ND
I used columnating lenses for the front, which are glued to cut down
stock reflectors. The light output is very linear, and will throw for
about 30 feet. They have leychain clips on them, and can be cut off
if not needed. Since they Use Nite-Ize endcaps, 5 seperate modes
are available.. High,Med,Low,Flash,S.o.S are available. They will also
shut off after 10 mins or so automatically. That feature can not be
disabled as far as i know. They are also Direct-Drive from the
Nite-Ize Endcaps. I dont know the Specific Run-time, but they will
get a little bit warm on high. The Endcaps do blink when in standy
mode, ie,"Off". The red one will also bling the Osram Led in the front
when off due to the lower drive voltage matching the red led in the
tailcap. The white one does not exibit this behavior
.
They have a few Dings and Dents due to them being my Original Edc's,
but retired them to the closet till now.
I am Asking 40.00ea Price Drop as of Sept 7th from 45.00
Shipping included inside the U.S., Intl Extra
Also, Batteries included..
Now onto the P7 Mags..
As you can see, They have built-in battery Meters. Neat, Huh?:devil:
I put ALOT of thought into making a truly unique Mag Custom for
you guys:candle:.
They will run on any combination of batteries you can think of....
For instance, 2x of any 17650,18650, or D-Size Lithium Ions.
6AA in a Mdocod Type adapter.. He still has about a Dozen
or so left..
Or, 3x CR-123's by using the included spacer. Unfortunately though,
the battey meter won't work with the CR-123's or AA's due to the
different voltage ranges. The reason why i say to use 3x CR-123's
is becuase of the high current drain on two cells (1.9a) versus
three cells (1.07a)
Here are some more Shots of the Mags...
The front lenses on both 2-D mags are from dissected 55mm camera
lenses. The Reflector in the Black Mag is a modified stock version with
a Light orange peel coating. The Silver one is Just Stock. I purchased
both the Emmiters, CSWOI P7's, and Heatsinks from Brightlumens
wave
I am Asking 215.00, Shipping included in the U.S., Intl Extra.
They Come with a Battery Adapter for the 18650's
The CR-123's will fit in the battery adapter tube, but are a little
loose.. I have also made a spacer, which is included, for using
the 3x CR-123's.
Also, here is another option for the Mags, which can be doneto "Any"
Mag you want, except the Solitare... 20.00 is what it will cost ya
for the caps to be shipped with the included 2-D mags i have listed
here, or there will be an extra shipping charge if you send me yours.
Now, onto.... "My Precious"
I have nicknamed her, "Ouchies". For a good reason...
This light started out as a MCU-C7 from DX, and
turned into this lovely monster you see here..
Specs:
MCU-C7 Driver board with Multiple mode Groups (See Instructions Below)
Rear Button Lights up when light is off.
P7 Emitter driven at 2.2a on high (Gets Warm!) (Its the one from DX)
Can Operate from a Nimh/Alkaline with Included Adapter.
It now resides in a Trustfire TR-801 18650 Body
Some more Pics to Drool Over..
Since i carried this light on my keychain for a while, there are minor
scratches...
I am Asking 125.00, Shipping Incl in U.S. Intl Extra Sold
Any Questions??
Robert M.
Red Aspheric Single Cell 5-Mode Mini-Mag 40.00 U.S. ship incl, intl xtra
White Aspheric Single Cell 5-Mode Mini-Mag 40.00 U.S. ship incl, intl xtra
Black 2-D Mag with battery meter, 3-Mode, P7 CSWOI Emitter Sold
Silver 2-D Mag with battery meter, 3-Mode, P7 CSWOI Emitter 215.00
Both 2-D Mags Have U.S. Shipping included, Intl Extra..
Okeedokee, A Group Photo


As you can see, Lots-o-Lights up for Grabs
Lets start with the little guys first..

These little guys had a life once as 2AA mini-mags...
But i couldn't leave them like that! I Mini-Me'ed them, and
made them 5-Mode Key-Chainers :devil:
Specs:
White and Red Osram Dragon Led's From Digikey,
White
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=475-2587-1-ND
Red/Amber
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=475-2580-1-ND
I used columnating lenses for the front, which are glued to cut down
stock reflectors. The light output is very linear, and will throw for
about 30 feet. They have leychain clips on them, and can be cut off
if not needed. Since they Use Nite-Ize endcaps, 5 seperate modes
are available.. High,Med,Low,Flash,S.o.S are available. They will also
shut off after 10 mins or so automatically. That feature can not be
disabled as far as i know. They are also Direct-Drive from the
Nite-Ize Endcaps. I dont know the Specific Run-time, but they will
get a little bit warm on high. The Endcaps do blink when in standy
mode, ie,"Off". The red one will also bling the Osram Led in the front
when off due to the lower drive voltage matching the red led in the
tailcap. The white one does not exibit this behavior

They have a few Dings and Dents due to them being my Original Edc's,
but retired them to the closet till now.
I am Asking 40.00ea Price Drop as of Sept 7th from 45.00
Shipping included inside the U.S., Intl Extra
Also, Batteries included..
Now onto the P7 Mags..

As you can see, They have built-in battery Meters. Neat, Huh?:devil:
I put ALOT of thought into making a truly unique Mag Custom for
you guys:candle:.
They will run on any combination of batteries you can think of....
For instance, 2x of any 17650,18650, or D-Size Lithium Ions.
6AA in a Mdocod Type adapter.. He still has about a Dozen
or so left..
Or, 3x CR-123's by using the included spacer. Unfortunately though,
the battey meter won't work with the CR-123's or AA's due to the
different voltage ranges. The reason why i say to use 3x CR-123's
is becuase of the high current drain on two cells (1.9a) versus
three cells (1.07a)

Here are some more Shots of the Mags...





The front lenses on both 2-D mags are from dissected 55mm camera
lenses. The Reflector in the Black Mag is a modified stock version with
a Light orange peel coating. The Silver one is Just Stock. I purchased
both the Emmiters, CSWOI P7's, and Heatsinks from Brightlumens
I am Asking 215.00, Shipping included in the U.S., Intl Extra.
They Come with a Battery Adapter for the 18650's
The CR-123's will fit in the battery adapter tube, but are a little
loose.. I have also made a spacer, which is included, for using
the 3x CR-123's.
Also, here is another option for the Mags, which can be doneto "Any"
Mag you want, except the Solitare... 20.00 is what it will cost ya
for the caps to be shipped with the included 2-D mags i have listed
here, or there will be an extra shipping charge if you send me yours.

Now, onto.... "My Precious"
I have nicknamed her, "Ouchies". For a good reason...
This light started out as a MCU-C7 from DX, and
turned into this lovely monster you see here..

Specs:
MCU-C7 Driver board with Multiple mode Groups (See Instructions Below)
Rear Button Lights up when light is off.
P7 Emitter driven at 2.2a on high (Gets Warm!) (Its the one from DX)
Can Operate from a Nimh/Alkaline with Included Adapter.
It now resides in a Trustfire TR-801 18650 Body
Some more Pics to Drool Over..





Since i carried this light on my keychain for a while, there are minor
scratches...
I am Asking 125.00, Shipping Incl in U.S. Intl Extra Sold
Any Questions??

Robert M.
Last edited: