Britelumens
Enlightened
*** 4th Batch MIL SPEC HA III ***
The MAGs hosts are in, now we are talking......
Hi Guys,
Back by popular demand! The EVERGREEN Maglite in HA III finish!!
First of all, let me start by making an apology to members who have been patiently waiting without much complain
for this 4th batch custom MAG HA III run. You have asked for it , and here you have it.
Just like the previous 1st, 2nd and successful 3rd batch of the HA III. This 4th batch would be as good if not better.
That is because of a new finishing which is HA III Matt Black that I would like to explore on this batch.
For efficiency, logistic , order simplicity and quality of this HA III run just like others earlier batches.
Below are the possible types of configurations, designs that is going are going to be offer.
Nevertheless, designs and other type of MAG hosts availability might be feasible.
Thank you everyone for making this possible. This is your thread modders! :thumbsup:lovecpf
SUREFIRE M6 for color comparison (latest 4th batch completion) , NOT FOR SALE
***ESTIMATED SHIPPING OUT DATE IS BY 31st July 2009***.
Progress status updated as of 24 July 2009
Custom 1C bored to fit AW C Cell 3.7 volt
A complete 1D setup, will look better in the HA III
This 1D with modified tail cap is much shorter than the already short standard 1D ( comparison with my standard 1D )
PLEASE READ BEFORE ORDERING:
Hi guys, thanks for all the patient while I have been busy coordinating to get this 4th batch HA III moving for you guys. Before , making any payment, I would urge everyone to take some of your time to read this before making payment.
#1
Due to popular demand and to ensure everyone get a hand of this run, all 2D host MAG head will be in FLUTE / FINNED custom finish. With either HA III olive or HA III matt black (new) coating. For the HA III olive coat, you can refer to the above photo comparison with a SF M6, or you can search some of my older thread. For the new HA III coat in matt black. This is the first and I could not show you the photos until the produce is finished. So you have to decide for yourself what color you want when making payment.
#2
NO OBLIGATION, Like all previous HA III run, I do not require advance payment or your commitment to prevent any unhappiness arise due to unforeseen changes that might come along the way. Nevertheless, for those who have previous experience dealing with me know how I stand on my product and service if you decided to pay first. And that naturally will guaranteer you get your order. Else, you can pay or order when the item are all ready for shipping and photo session. But I cannot promise if they are still available if the slots are being taken up by members along the way who pay first. Be advised!
#3
Rest assured that I am with you and therefore, like everyone else, I dislike waiting and delay. As long factors that within my control, I will always push for the earliest date possible. Status of progress or updates will also be available here in this thread for you. Everyone will have a piece of mind.
The key message is: If you think you cannot wait or lack of patient, please do not place an order.
#4
The available list are more or less below, but, other host or configuration will be added along the way or if they are feasible, etc..larger host.
Due to the thin wall of the MAG C head, I am looking into the possibility of a flute / finned like the MAG D heads. Hence the status is under "Pending" and does not accept payment yet.
#5
When making payment, PLEASE make a note what you are payment for, your nickname in CPF and all other important details so I can identify and keep a tab on it. :thumbsup:
Enough said, lets start the ball rolling :nana:
PROGRESS STATUS:
1) Host Arrived (Ended )
2) Machining ( Ended )
3) Anodizing ( Ended )
4) Host Finishing ( Ended )
5) Host Delivery ( In Process )
Available designs and configurations for purchase
1) MAG HA III 1D host - $120
( Finned & Flute Mag head / Cut / rethread )
The above is compatible with 1 AW /Kai D Li ion battery
#1 niner (PAID & SHIPPED)
#2 Scatterguns (PAID & SHIPPED)
#3 mash.m (PAID & SHIPPED)
#4 AVAILABLE
#5 AVAILABLE
#6 AVAILABLE
#7 NOT AVAILABLE
#8 NOT AVAILABLE
#9 NOT AVAILABLE
#10 NOT AVAILABLE
2) MAG HA III 1.5D host - $130
( Finned & Flute Mag head / Cut / rethread / Tri-Bored )
The above is compatible with 1 unit of FM 3 x 17670 battery holder.
#1 Drywolf (PAID & SHIPPED)
#2 niner (PAID & SHIPPED)
#3 ehallspqr (PAID & SHIPPED)
#4 mendhammarsh (PAID & SHIPPED)
#5 K-T (PAID & SHIPPED)
#6 NOT AVAILABLE
#7 NOT AVAILABLE
#8 NOT AVAILABLE
#9 NOT AVAILABLE
#10 NOT AVAILABLE
3) MAG HA III 2D stock host - $105
( Finned & Flute head )
The above is stock 2D in HA III with Finned / Fluted head
#1 JimmyM (PAID & SHIPPED)
#2 sunshine57 (PAID & SHIPPED)
#3 KROMATICS (PAID & SHIPPED)
#4 KROMATICS (PAID & SHIPPED)
#5 AVAILABLE
#6 NOT AVAILABLE
#7 NOT AVAILABLE
#8 NOT AVAILABLE
#9 NOT AVAILABLE
#10 NOT AVAILABLE
4) MAG HA III 1C standard - $95
( Cut / Bored / Rethread to fit AW C 26500 Li Ion battery )
#1 tx101 (PAID & SHIPPED)
#2 niner (PAID & SHIPPED)
#3 AVAILABLE
#4 AVAILABLE
5) MAG HA III 2C host - $65
( Stock 2C Mag host )
#1 JimmyM (PAID & SHIPPED)
#2 tx101 (PAID & SHIPPED)
Shipping is $18 each. Additional host add $8.
Registered mail please add $2.00. I'll be responsible for lost or undelivered mail should you decided to choose this option.
I'll not be responsible for lost mail shipping via regular airmail. Please allow 9 - 11 working days for it to arrive.
PAYMENT TO: info (AT) britelumens dot com
With regards,
Jo @ Britelumens
Last edited:
