http://www.brightguy.com/manufacturer/maglite.php lists it at 5.3 lumens.
Thanks. About 30 lumens then?
30 LUMENS ? ? ? ! ! !
:lolsign::lolsign::lolsign:
The newer Minimag AA bulbs are brighter. If I had to guess, I'd say they start out around 20 lumens on fresh alkalines and drop to about 10 lumens in an hour.
But my perception may be a little warped, since I tend to only use the light with a well focused hotspot. The newer Minimag bulbs are definitely brighter though.
Actually, according to all my tests with lightmeter, a focusable incan like Maglite has a higher total output with the beam at wide(not focused) setting.
Thanks. About 3 lumens then?
I remember back when I was a pre flashaholic, I tried using a minimaglite to illuminate the letterbox number while I was in the car. I couldnt see a damn thing
That makes complete sense since when you focus you are drawing the bulb back into the light and making it harder to 'see'. I imagine it goes to show why a lot of CPFers don't care for focusable lights - as you tighten the hotspot you lose lumens so you're not really gaining much unless you have a very good reflector.
:welcome:
For alkaline batteries:
Multiply Overall Output by 1.39 (for LED flashlights) to get lumens: 5.80*1.39=8 lumens.
That is 100% on the runtime chart. This drops to 50% 4 lumens in 45 minutes then to 25% 2 lumens in about 5 hours.
-
For NiMH batteries:
Because NiMH batteries is 1.2V instead of 1.5V for fresh alkaline, Brightguy's 5.3 lumens should be correct.