ernsanada
Flashlight Enthusiast
- Joined
- Apr 29, 2004
- Messages
- 2,962
I just received the Jet I AAA Jet-u from, Emilion's Workbench
Shipping took 7 days.
Cost $55.00
Fit and finsih is excellent.
The Type III Hard Anodize has lines in it. Caused by too much anodize.
Description is from Emilion's Workbench.
model:JET-μ
LED:Soul SSC P4
Max Lumens:120
Reflector: Textured aluminum reflector
Lens: Sapphire crystal
Material: T6061 aircraft grade aluminum HAIII processing
Battery:AAA or 10440 Li-ion
Voltage : 0.7 ~ 4.2v
Function : 33% - 12% - 100% -Flash -Standby
Memory function : 2 seconds after mode selection, the flashlight will flash once to confirm memorzation of last mode selected.
Battery life (AAA)
Main: 12 lumens 2 hrs
Lo: 8 lumens 4 hrs
Hi: 30 lumens 1 hrs
---------------------
Battery Life (10440)
Main : 40 lumens 1 hrs
Lo : 15 lumens 3.5 hrs
Hi : 120 lumens 25 mins
Waterproof:30Meter
Size:13mm X 72mm
Weight: 13.8 gram (battery excluded)
Uses SSC P4.
Battery tube.
Uses "sticky sponge" to eliminate battery rattle
Note the fines lines are seen through out the surface of the Type III hard Anodize.
Comes with an extra o-ring, split ring and key chain buckle.
Left, Jet I AAA Jet-u. Right, Fenix LOD CE Q2
Left, Jet I AAA Jet-u. Right, Fenix LOD CE Q2
All beamshots taken by freshly charged Energizer AAA 850mAh Batteries.
Jet I AAA Jet-u. @ 27"
Fenix LOD CE Q2 @ 27"
Left, Jet I AAA Jet-u. Right, Fenix LOD CE Q2 @ 27"
I am dissapointed by the brightness of the Jet I AAA Jet-u.
I usually take beam shots @ around 77", but due to the weakness of the Jet I AAA Jet-u beam I had to take the beam shots closer.
The Type III Hard Anodize finish poor.
Shipping took 7 days.
Cost $55.00
Fit and finsih is excellent.
The Type III Hard Anodize has lines in it. Caused by too much anodize.
Description is from Emilion's Workbench.
model:JET-μ
LED:Soul SSC P4
Max Lumens:120
Reflector: Textured aluminum reflector
Lens: Sapphire crystal
Material: T6061 aircraft grade aluminum HAIII processing
Battery:AAA or 10440 Li-ion
Voltage : 0.7 ~ 4.2v
Function : 33% - 12% - 100% -Flash -Standby
Memory function : 2 seconds after mode selection, the flashlight will flash once to confirm memorzation of last mode selected.
Battery life (AAA)
Main: 12 lumens 2 hrs
Lo: 8 lumens 4 hrs
Hi: 30 lumens 1 hrs
---------------------
Battery Life (10440)
Main : 40 lumens 1 hrs
Lo : 15 lumens 3.5 hrs
Hi : 120 lumens 25 mins
Waterproof:30Meter
Size:13mm X 72mm
Weight: 13.8 gram (battery excluded)
Uses SSC P4.
Battery tube.
Uses "sticky sponge" to eliminate battery rattle
Note the fines lines are seen through out the surface of the Type III hard Anodize.
Comes with an extra o-ring, split ring and key chain buckle.
Left, Jet I AAA Jet-u. Right, Fenix LOD CE Q2
Left, Jet I AAA Jet-u. Right, Fenix LOD CE Q2
All beamshots taken by freshly charged Energizer AAA 850mAh Batteries.
Jet I AAA Jet-u. @ 27"
Fenix LOD CE Q2 @ 27"
Left, Jet I AAA Jet-u. Right, Fenix LOD CE Q2 @ 27"
I am dissapointed by the brightness of the Jet I AAA Jet-u.
I usually take beam shots @ around 77", but due to the weakness of the Jet I AAA Jet-u beam I had to take the beam shots closer.
The Type III Hard Anodize finish poor.