new 3x26500 Megalennium

Candle Power Forums

Help Support Candle Power:

GunSmoke16610

Enlightened
Joined
Mar 4, 2009
Messages
346
City & State/Province
Alabama
Built a FM1909 Hotwire using a Magelennium 3x26500 body. The quality of the machining on this host is top notch. The HA finish is a little more glossy than I prefer however, it does match the KT-4 fairly decent. The other benefit to this host is the ability to use a AW softstart in the tail cap.

With the AW running low power 30% the runtime is approx 90 minutes with a few short bursts of 100% here and there :cool: I checked my cells and they were at 3.1 V ready for a fresh charge!


I am very impressed with this light and will be using often

P1010001.jpg
 
Hey - is that my KT4 head? ;)

That looks like a rockin' light. I've had my eye on that 3x26500 body for a while now. How is the balance?

Would you be able to post a pic with that light next to a M6 for comparison?
 
Hey - is that my KT4 head? ;)

That looks like a rockin' light. I've had my eye on that 3x26500 body for a while now. How is the balance?

Would you be able to post a pic with that light next to a M6 for comparison?


The balence is excellent. One of the reasons I like this light. Later this week I will have my M6 and will take a few pics compairing this the M6 and a BigLeef
 
It is about 2.5in longer than a M6.

I have the exact same combo and it is a very nice bright torch. I as well like that it takes the softstart switch.

I do prefer the compactness of my tri-bored 1185 Mags though. The 1185 Mag has more side spill (I'm using a LOP reflector in my Mag) and the hot spot seems more intense. I'm going to try a Mag head on my 3x16500 Megalennium body tonight and see if that makes a difference.

This could be a lethal weapon if you grabbed the head and hit someone with the knurly part of the body.
 
The balence is excellent. One of the reasons I like this light. Later this week I will have my M6 and will take a few pics compairing this the M6 and a BigLeef

Yeah - I picked up FMs 3x26500 black D36 light with a 1909 in it. It is a complete flood light - but brilliant as can be out to about 200 ft.

I'm curruntly running a similar setup to what you have in my M6 with a 1909 in the KT4 head, but 6xIMR16350 in the standard battery carrier. Runtime is probably 10-15 minutes at full brighness - but I will never need that much light for even that period - so it's just hard to justify the 3x26500 Mega purchase.....

Not sure how much you have played with focus on the 1909 bulb in the KT4 head, but I have found that when set the bulb about 0.5-1mm forward of the ideal focal point for throw I get a brilliant wide floody spot still with some serious through.
 
Not sure how much you have played with focus on the 1909 bulb in the KT4 head, but I have found that when set the bulb about 0.5-1mm forward of the ideal focal point for throw I get a brilliant wide floody spot still with some serious through.


Thanks for the comments on this. I noticed that setting the bulb high produces a shadow in the center of the hotspot. Looking at the focal point on my light its about 2.5MM

Regarding your comments on the M6 thats a great light and I really like it. For the 1909 I prefer the larger cells, only 3 to charge and monitor for voltage. When keeping the light at 30% with the AM ithe run times are excellent.

What voltage do you recharge your IMR cells at?


Thanks
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Back
Top